3381295 CONNECTOR Caterpillar parts
424B
Rating:
Alternative (cross code) number:
CA3381295
338-1295
3381295
CA3381295
338-1295
3381295
BACKHOE LOADER,
Compatible equipment models: 3381295:
Number on catalog scheme:
4
For full view, you need register
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02229293
Disconnect harness assembly (2).
Remove bolt (1) and crankshaft position sensor (3).
Remove the O-ring seal from crankshaft position sensor (3). Installation Procedure
Install crankshaft position sensor (3) in reverse order of removal.
Install a new O-ring seal on crankshaft position sensor (3). Lubricate the O-ring seal with clean engine oil.
Install crankshaft position sensor (3) in the front housing. Install bolt (3). Tighten bolt (3) to a torque of 28 7 N m (21 5 lb ft).
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02229293
Disconnect harness assembly (2).
Remove bolt (1) and crankshaft position sensor (3).
Remove the O-ring seal from crankshaft position sensor (3). Installation Procedure
Install crankshaft position sensor (3) in reverse order of removal.
Install a new O-ring seal on crankshaft position sensor (3). Lubricate the O-ring seal with clean engine oil.
Install crankshaft position sensor (3) in the front housing. Install bolt (3). Tighten bolt (3) to a torque of 28 7 N m (21 5 lb ft).
Caterpillar parts catalog:
Parts connector Caterpillar catalog:
272D, 272D XHP, 299D, 299D XHP, 906H, 907H, 908H
1782651
CONNECTOR AS
236D, 242D, 246D, 539, 584, G315B, HM415B, S305, VHS-50, VRG-20/2
236D, 242D, 246D, 539, 584, G315B, HM415B, S305, VHS-50, VRG-20/2
0869501
CONNECTOR
236D, 242D, 246D
236D, 242D, 246D
2376095
CONNECTOR
262D, 277D, 305.5E, 308D, 308E CR, 308E SR
262D, 277D, 305.5E, 308D, 308E CR, 308E SR
2376094
CONNECTOR AS
262D, 277D, 305.5E, 308D, 308E CR, 308E SR
262D, 277D, 305.5E, 308D, 308E CR, 308E SR
24M, 262D, 272D, 272D XHP, 277D, 299D, 299D XHP, 312C, 312C L, 312D, 312D L, 315C, 315D L, 318D2 L, 319D, 319D L, 319D LN, 320B, 320B FM LL, 320B L, 320C, 320D, 320D FM, 320D L, 320D LN, 320D2, 320D2 ...
120B, 16, 1673C, 215, 215B, 225D, 231D, 235, 235C, 235D, 245, 245B, 245D, 24H, 30/30, 312B L, 320, 320 L, 3208, 320B, 320B FM LL, 320N, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3408B, 3412,...
120G, 12G, 130G, 140G, 140H, 143H, 14G, 14H, 14H NA, 160H, 163H, 1673C, 16G, 16H, 235, 245, 3304, 3306, 3306B, 3306C, 3406, 3408, 528, 621E, 621F, 623E, 623F, 627B, 627E, 627F, 631E, 633E II, 637D, 63...
4N7476
CONNECTOR
910, 931B, D3, RT50
910, 931B, D3, RT50
424B, 924G, 924GZ, 930G, IT28G
2021673
CONNECTOR
308C, 308E, 308E CR, 308E SR, 424B
308C, 308E, 308E CR, 308E SR, 424B
140M, 307B, 3126E, 315B L, 317B LN, 318B, 320D FM, 322C FM, 325C, 424B, 527, 584, 834G, 834H, 834K, 836G, 836H, 836K, 980H, 980K, 986H, 988H, 988K, AD60, C-10, C-12, C11, C12, C13, D5HTSK II, HH44 DE,...