3C8250 CONNECTOR AS Caterpillar parts
Rating:
Alternative (cross code) number:
CA3C8250
3C-8250
3C8250
CA3C8250
3C-8250
3C8250
Weight: 0.58 pounds 0 kg.
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B - Guide Stud
(M 12 X 1.75 by 6 inch) 2
Illustration 1 g01185033
Attach Tooling (A) and a suitable lifting device to flywheel (1). The weight of flywheel (1) is approximately 23 kg (50 lb).
Remove two bolts (2) and install Tooling (B). Remove remaining bolts (2) .
Remove flywheel (1) .
Place the flywheel on a suitable block. Use a hammer and a punch in order to remove the flywheel ring gear.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B - Guide Stud
(M 12 X 1.75 by 6 inch) 2
C 9S-3263 Thread Lock Compound 1
Illustration 2 g01185033
Raise the temperature of the flywheel ring gear. Do not use a torch to heat the flywheel ring gear. Position the flywheel ring gear on the flywheel with the part number toward the crankshaft.
Attach Tooling (A) and a suitable lifting device to flywheel (1). The weight of flywheel (1) is approximately 23 kg (50 lb). Position flywheel (1) on Tooling (B) .
Apply Tooling (C) to the threads of bolts (2). Install bolts (2). Remove Tooling (B) and install remaining bolts (2) .
Tighten the bolts evenly to a torque of 120 20 N m (90 15 lb ft).
Check the flywheel runout. Refer to Testing and Adjusting, "Flywheel - Inspect".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B - Guide Stud
(M 12 X 1.75 by 6 inch) 2
Illustration 1 g01185033
Attach Tooling (A) and a suitable lifting device to flywheel (1). The weight of flywheel (1) is approximately 23 kg (50 lb).
Remove two bolts (2) and install Tooling (B). Remove remaining bolts (2) .
Remove flywheel (1) .
Place the flywheel on a suitable block. Use a hammer and a punch in order to remove the flywheel ring gear.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B - Guide Stud
(M 12 X 1.75 by 6 inch) 2
C 9S-3263 Thread Lock Compound 1
Illustration 2 g01185033
Raise the temperature of the flywheel ring gear. Do not use a torch to heat the flywheel ring gear. Position the flywheel ring gear on the flywheel with the part number toward the crankshaft.
Attach Tooling (A) and a suitable lifting device to flywheel (1). The weight of flywheel (1) is approximately 23 kg (50 lb). Position flywheel (1) on Tooling (B) .
Apply Tooling (C) to the threads of bolts (2). Install bolts (2). Remove Tooling (B) and install remaining bolts (2) .
Tighten the bolts evenly to a torque of 120 20 N m (90 15 lb ft).
Check the flywheel runout. Refer to Testing and Adjusting, "Flywheel - Inspect".