CONNECTOR KIT 4C3406 - Caterpillar

Illustration 17 g06014370
View of Rear Left-Hand Signal Lamp Mounting Bracket
(1) 7K-1181 Cable Strap
(3) 8T-4121 Hard Washer
(5) 8T-4137 Bolt
(11) 130-5300 Clip
(12) 154-6626 Bracket As
(16) 18 482-6317 Bracket As (LH)
(17) 482-7883 Lighting Harness As (Rear Lamps)
Assemble left-hand rear signal lamp assembly, as shown in Illustration 17.
Install three clips (11) onto bracket (12) using one bolt (5) and one washer (3).
Install bracket (12) onto left-hand signal bracket (16) using one bolt (5) and one washer (3).
Attach the three receptacles from lighting harness (17) to three clips (11).
Secure lighting harness (17) to left-hand signal bracket (16) using one cable straps (1).
Illustration 18 g06014511
View of Rear Left-Hand Signal Lamp Mounting Bracket
(14) 273-3575 Rear Lamp Gp (LH)
(16) 482-6317 Bracket As (LH)
Attach left-hand rear signal lamp (14) to left-hand signal bracket (16).
Illustration 19 g06014519
View of Rear Left-Hand Signal Lamp Mounting Bracket
(3) 8T-4121 Hard Washer
(4) 8T-4136 Bolt
(15) 389-9651 Plate
(16) 482-6317 Bracket As (LH)
Attach plate (15) to left-hand signal bracket (16) using two bolts (4) and two hard washers (3).
Illustration 20 g06014542
View of Rear Left-Hand Signal Lamp Mounting Bracket
(2) 7X-7729 Washer
(6) 8T-4194 Bolt
(7) 8T-4195 Bolt
(8) 8T-4821 Washer
(10) 101-3129 Stud
(11) 130-5300 Clip
(13) 198-4778 Hard Washer
(16) 482-6317 Bracket As (LH)
Attach left-hand signal bracket (16) to the rear frame using the hardware that is shown in Illustration 20.Note: Refer to Illustration 1for the correct orientation of left-hand signal bracket (16).
The top left mounting hole and the bottom mounting will require two bolts (7) and two washers (2).
The top right mounting hole will require one bolt (6), one hard washer (13), and one washer (8).
Thread stud (10) into boss on the inside of the left rear platform.
Connect the two plugs from the frame harness to the two receptacles from lighting harness (17).
Connect the two receptacles from lighting harness (17) to the clips (11).
Illustration 21 g06014535
Right Side Rear View of Machine
(9) 9R-1499 Reflector
(16) 482-6317 Bracket As (LH)
Attach reflector (9) to left-hand signal bracket (16).