3932170 CONSOLE Caterpillar parts
301.7D, 301.7D CR, 302.2D, 302.4D
Rating:
Alternative (cross code) number:
CA3932170
393-2170
3932170
CA3932170
393-2170
3932170
Weight: 4 pounds 1 kg.
MINI HYD EXCAVATOR,
Number on catalog scheme:
3
For full view, you need register
Information:
Configuration
Settings Groups
The "Settings Group Support Level" must be set to "Multiple Group" for Tier 4i rental product applications that use the EMCP 4.2 or EMCP 4.4 with "complex software". The multiple group setting allows configuration of the parameters for groups 1 through 4. The multiple group setting also allows CAN communication commands from the EMCP to activate the appropriate CDVR group.Note: Refer to the "CDVR Changes" information in Specifications, Systems Operation, Testing and Adjusting, RENR7941, "General Information" for related information.Configure CDVR setting group #1 parameters to be compatible with setting group #1 parameters in the EMCP. Configure the remaining three groups in the same manner.If the parameter "Settings Group Support Level" is to be set to "Single Group" for the Tier 4i rental product applications, then the CDVR will disable and lockout excitation.The "Settings Group Support Level" configuration parameter must be set to "Single Group" for the following:
Open generator sets
Any application that does not use an EMCP 4.2 or EMCP 4.4 with "complex software"The "Single Group" setting disables the multiple group features and allows changes to the original configuration parameters for the following:
Rated voltage
Rated current
Rated frequency
AVR voltage set point
Power input frequency
Minimum frequency
Knee frequencyConfigure the parameters that are listed above to be compatible with the machine ratings.If the "Settings Group Support Level" parameter is to be set to "Multiple Group" for open generator sets or any application that does not use an EMCP 4.2 or EMCP 4.4 with "complex software", then the CDVR will disable and lockout excitation.Programmable Input
The following are the configuration options for the input and how to use the input.Fault Reset - Activation of the input will cause all shutdown faults in the CDVR to be resetLoad Compensation Force To Off Mode - Activation of the input will cause load compensation to be forced to "Off" mode while this input is activated.Load Compensation Force To Voltage Droop Mode - Activation of the input will cause load compensation to be forced to "Voltage Droop" mode while this input is activated.Load Compensation Force To Line Drop (IR Compensation) Mode - Activation of the input will cause load compensation to be forced to "Line Drop" mode while this input is activated.The following is an example of using the programmable input to manipulate load compensation. In the example, load compensation is programmed to "Off" and the programmable input programmed to "Voltage Droop" mode. Whenever the input is not active, load compensation will be in "Off" mode. When the input is activated, load compensation will switch to "Voltage Droop" mode and remain in voltage droop as long as the input is activated. Once the input is deactivated, load compensation will revert to "Off".Configuration Files
When using a fleet configuration or ECM replacement file from another unit which did not support multiple settings groups, the "Single Group" parameters will not be received from the file if the parameter "Setting Group Support Level" is set to "Multiple Group".CDVR Programming Error Protection
With the new CDVR firmware, the possibility exists that the CDVR parameter "Setting Group
Settings Groups
The "Settings Group Support Level" must be set to "Multiple Group" for Tier 4i rental product applications that use the EMCP 4.2 or EMCP 4.4 with "complex software". The multiple group setting allows configuration of the parameters for groups 1 through 4. The multiple group setting also allows CAN communication commands from the EMCP to activate the appropriate CDVR group.Note: Refer to the "CDVR Changes" information in Specifications, Systems Operation, Testing and Adjusting, RENR7941, "General Information" for related information.Configure CDVR setting group #1 parameters to be compatible with setting group #1 parameters in the EMCP. Configure the remaining three groups in the same manner.If the parameter "Settings Group Support Level" is to be set to "Single Group" for the Tier 4i rental product applications, then the CDVR will disable and lockout excitation.The "Settings Group Support Level" configuration parameter must be set to "Single Group" for the following:
Open generator sets
Any application that does not use an EMCP 4.2 or EMCP 4.4 with "complex software"The "Single Group" setting disables the multiple group features and allows changes to the original configuration parameters for the following:
Rated voltage
Rated current
Rated frequency
AVR voltage set point
Power input frequency
Minimum frequency
Knee frequencyConfigure the parameters that are listed above to be compatible with the machine ratings.If the "Settings Group Support Level" parameter is to be set to "Multiple Group" for open generator sets or any application that does not use an EMCP 4.2 or EMCP 4.4 with "complex software", then the CDVR will disable and lockout excitation.Programmable Input
The following are the configuration options for the input and how to use the input.Fault Reset - Activation of the input will cause all shutdown faults in the CDVR to be resetLoad Compensation Force To Off Mode - Activation of the input will cause load compensation to be forced to "Off" mode while this input is activated.Load Compensation Force To Voltage Droop Mode - Activation of the input will cause load compensation to be forced to "Voltage Droop" mode while this input is activated.Load Compensation Force To Line Drop (IR Compensation) Mode - Activation of the input will cause load compensation to be forced to "Line Drop" mode while this input is activated.The following is an example of using the programmable input to manipulate load compensation. In the example, load compensation is programmed to "Off" and the programmable input programmed to "Voltage Droop" mode. Whenever the input is not active, load compensation will be in "Off" mode. When the input is activated, load compensation will switch to "Voltage Droop" mode and remain in voltage droop as long as the input is activated. Once the input is deactivated, load compensation will revert to "Off".Configuration Files
When using a fleet configuration or ECM replacement file from another unit which did not support multiple settings groups, the "Single Group" parameters will not be received from the file if the parameter "Setting Group Support Level" is set to "Multiple Group".CDVR Programming Error Protection
With the new CDVR firmware, the possibility exists that the CDVR parameter "Setting Group
Caterpillar parts catalog:
Parts console Caterpillar catalog:
3792783
CONSOLE AS
301.4C, 301.7D, 301.7D CR, 302.2D, 302.4D, 302.7D
301.4C, 301.7D, 301.7D CR, 302.2D, 302.4D, 302.7D
4368923
CONSOLE AS
301.7D CR
301.7D CR
4431210
CONSOLE AS
302.7D
302.7D
3813025
CONSOLE
301.4C
301.4C
3792783
CONSOLE AS
301.4C, 301.7D, 301.7D CR, 302.2D, 302.4D, 302.7D
301.4C, 301.7D, 301.7D CR, 302.2D, 302.4D, 302.7D
2838340
CONSOLE-REAR
M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH, M325D L MH, M325D MH, M330D
M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH, M325D L MH, M325D MH, M330D
2838339
CONSOLE-FRONT
M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH, M325D L MH, M325D MH, M330D
M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH, M325D L MH, M325D MH, M330D
2081137
CONSOLE
M313C, M315C, M316C, M318C, M318C MH, M322C, M325C MH
M313C, M315C, M316C, M318C, M318C MH, M322C, M325C MH
6C5514
CONSOLE AS
215D, 229D, 235C, 235D
215D, 229D, 235C, 235D
6C3700
CONSOLE AS
215D, 229D, 245B
215D, 229D, 245B
6W3043
CONSOLE AS
225, 225D, 227, 231D, 235D, 245
225, 225D, 227, 231D, 235D, 245
4V9278
CONSOLE ASSEM.
215, 215B, 215C, 225, 229, 235, 245
215, 215B, 215C, 225, 229, 235, 245
2V8268
CONSOLE ASSEM.
215, 225, 245
215, 225, 245
4368923
CONSOLE AS
301.7D CR
301.7D CR