CONT GP -E 10R6198 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     5P-8665     Cylinder Liner Puller Gp     1    Start By:
Remove the pistons and the connecting rods.
Illustration 1 g01005579
Use Tooling (A) to remove cylinder liner (1) .
Remove the O-ring seals from cylinder liner (1) .Installation Procedure
Table 2
Required Tools    
Tool     Part Number     Part Description     Qty    
B     2P-8260     Cylinder Liner Installer     1    
C     5P-3975     Rubber Lubricant     1    
Illustration 2 g03870706
Install the O-ring seals on cylinder liner (1) .
Apply Tooling (C) on the O-ring seals.Note: Refer to Testing and Adjusting, "Cylinder Liner Projection" for more information.Note: If you are installing a cylinder pack, ensure that the corresponding crankshaft throw is at bottom center.
Use Tooling (B) to install cylinder liner (1) .End By: Install the pistons and the connecting rods.