CONT GP -E 10R8099 - Caterpillar

1. Remove guards (1) and (2) from over the sprocket. 2. Start the machine. Move the machine forward until four nuts (3) can be removed from the sprocket segment.3. Remove the four bolts from the sprocket. Remove sprocket segment (4).Install Sprocket Segments
1. Put the four bolts (1) in the sprocket from the back side. Put the sprocket segment (2) in position on the sprocket.2. Push the four bolts through the sprocket segment. Put 5P3931 Anti-Seize Compound on the threads of the four bolts. Install the four nuts.3. Tighten the nuts to a torque of 130 30 lb.ft. (177 40 N m). Turn the four nuts 120° more to get a minimum torque of 280 lb.ft. (377 N m) on the four nuts. 4. Install guards (3) and (4) over the sprocket.