CONT GP 1504280 - Caterpillar

Illustration 1 g00812080
Depress service brake control (2) in order to prevent the machine from moving.
Engage transmission modulator control (1) .
Disengage the parking brake and move the transmission control (lever) to the desired position.
Release service brake control (2) .
Release transmission modulator control (1) .
Depress accelerator control (3) until you achieve the desired engine speed.
Drive the machine forward in order to have the best visibility and the best control.
For operator comfort and maximum service life of power train components, deceleration and/or braking is recommended before any directional shifts are made.
Secondary Steering
Note: The secondary steering system is an option.If the alert indicator for the primary steering comes on, steer the machine immediately to a safe location and stop the machine.Make any necessary repairs before you return the machine to operation.The effort that is needed for steering and for braking will increase when the engine is stopped.
Illustration 2 g00948999
Once the secondary steering system has been activated, it should remain ON no more than two minutes. This should be sufficient time to safely steer the machine to a stop. When the machine is stopped, turn the key start switch to the OFF position in order to turn OFF secondary steering. Prolonged use of the secondary steering system will cause the electric motor to overheat and cause damage to it's components.
The alert indicator for the primary steering system (4) indicates that the primary steering has failed. Also, this alert indicator allows you to know that the secondary steering is active. When the primary steering system fails, move the machine to a safe location. Stop the engine and investigate the cause. Do not operate the machine until all necessary repairs have been made.