CONT GP 1508410 - Caterpillar

Installation Procedure
Illustration 1 g00836229
Install engine oil filter base (9), studs (6), and the nuts.
Install bolts (7) .
Install engine oil filter (8) .
Illustration 2 g00101634
Apply a thin coat of engine oil to the gasket of the new filter.
Install the new filter by hand. When the gasket contacts the filter base, turn 3/4 turns more. This will tighten the filter sufficiently.Note: Every new oil filter has four rotation index marks. Each mark indicates 1/4 turn. Use the rotation index marks as a guide for tightening the oil filter.
Illustration 3 g00836223
Install bolts (5) .
Illustration 4 g00836216
Install bolts (4) .
Install elbow (2) .
Connect hose assembly (3) .
Illustration 5 g00836194
Install plug (1) .
Close the engine access door and the hood.