CONT GP 1688769 - Caterpillar

Illustration 37 g06034060
Remove clip (64).
Reposition all hose assemblies and harness assemblies to the rear of the machine.
Illustration 38 g06034065
Remove ground strap (65).
Illustration 39 g06034069
Remove plate (66). Disconnect hose assemblies (67) and (68).
Illustration 40 g06034075
Use Tooling (C) and two people to remove pin (69).
Illustration 41 g06265486
Typical Example
Position Tooling (B) and suitable blocking to support front frame (2) as shown in Illustration 41. Refer to Tool Operating Manual, NEHS1303, "Lift Group (Stand - 25 Ton)" for more information on Tooling (B).
Disconnect the steering frame lock. Refer to Operation and Maintenance Manual, "Steering Frame Lock".
Illustration 42 g06034081
Remove bolts (70) and lock plate (71). Remove shims (72).Note: Note the quantity and the order of shims (72) for installation purposes.
Illustration 43 g06034084
Remove spacer (73).
Illustration 44 g06034089
Remove bolts (74).
Illustration 45 g06034107
Use Tooling (D) to remove pin (75).
Illustration 46 g06034186
Position a suitable lift truck at the rear of rear frame (76). Attach two suitable lifting devices onto rear frame (76) and forks. Remove Tooling (A) from rear wheels (1).
Use the suitable lift truck to separate rear frame (76) from front frame (2).
Illustration 47 g06034124
Illustration 48 g06034146
Remove bolts (77). Remove plates (78) and (79). Remove shims (80).Note: Note the quantity and the order of shims (80) for installation purposes.
Illustration 49 g06034150
Remove lip seal (81) from plate (78).
Illustration 50 g06034158
Remove lip seal (82) from plate (79).
Illustration 51 g06034162
Remove lip seal (83).
Illustration 52 g06034164
Remove bearing assemblies (84).