CONT GP 3157429 - Caterpillar

Illustration 1 g02534498
Left side view of engine
Table 1
Specification for 229-8841 Cylinder Block Cover Gp
Item Qty Part Specification Description
2 3 4Y-9652 Gasket Install the gasket so that the bead is facing the cover.
Apply Loctite High Flex GM to the gasket surface that is on the cover. Spread the sealant uniformly on the face of the cover and around the bolt holes. The cover must be installed and tightened within10 minutes.
3 1 222-5893 Cover As
4 2 342-4977 Side Cover
5 23 6V-2317 Bolt Tighten bolt 1 through bolt 8 on each cover in a numerical sequence that is shown in Illustration 1 to standard torque.
Again, tighten bolt 1 through bolt 8 on each cover in a numerical sequence that is shown in Illustration 1 to standard torque.
6 1 210-3321 Stud
7 1 5C-7261 Nut
8 6 7W-3872 Sleeve Install the sleeve in six locations (1). Refer to Illustration 1