CONT GP- 3816525 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g00596882
Illustration 2 g00596913
Put identification on the harness assemblies for installation purposes. Remove the harness assemblies from alternator (3) .
Loosen nuts (5) on the adjustment rod.
Loosen the nut on bolt (1). Push the top of the alternator toward the cylinder block. Remove V-belt (2) .
Remove bolts (1) and (4). Remove alternator (3) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g00596882
Illustration 4 g00596913
Put alternator (3) in position on the alternator bracket and install bolt (1) .
Put the adjustment rod in position on the alternator and install bolt (4) .
Install V-belt (2). Tighten the V-belt. Refer to Testing and Adjusting, "Belt Tension Chart".
Tighten nuts (5) to a torque of 30 15 N m (22 11 lb ft).
Install the harness assemblies on the alternator.
Turn the battery disconnect switch to the ON position.