CONT GP-EH 5463606 - Caterpillar

Illustration 5 g03814496
(G) Left-hand side breather filter
(H) Left-hand side remote oil filter connectionNote: Ensure that the correct breather kit is selected for the specification of the engine.Removal Procedure
Remove the existing crankcase breather. Refer to Disassembly and Assembly, "Crankcase Breather - Remove" for the correct procedure. Remove any fir trees for the cable ties. Do not remove the valve from the cylinder block. Retain the bolts that secure the crankcase breather to the cylinder head.Installation Procedure
Illustration 6 g03383017
Typical example
Position new breather canister (1) onto the cylinder head and install bolts (2). Tighten the bolts (2) to a torque of 22 N m (195 lb in).
Illustration 7 g03383018
Typical example
Ensure that plastic tube assembly (3), tube assembly (4), and tube assembly (5) are clean and free from restriction.
Connect plastic tube assembly (5) to the drain on the breather canister (1). Ensure that the plastic tube assembly is locked into place.
Connect plastic tube assembly (3) to breather canister (1). Ensure that plastic tube assembly (3) is correctly locked into the inlet of the crankcase breather canister (1).
Ensure that plastic tube assembly (3) is correctly secured with the fir trees for the cable ties in the correct threaded holes. Use the most suitable route on the engine. Ensure that there are no dips or restrictions on the plastic tube assembly. The upper clipping point is to be kept clear.
Connect plastic tube assembly (4) to breather canister (1). Ensure that plastic tube assembly (4) is correctly locked into the inlet of the crankcase breather canister (1) and the valve mechanism cover.
Ensure that plastic tube assembly (4) is correctly secured with the fir trees for the cable ties in the correct plain or threaded holes.
Illustration 8 g03383019
Typical example
Secure the electrical connection to the engine oil cooler. Alternatively, the electrical connection (6) can be secured to the bracket (7) on the engine oil cooler.Wiring for 24V System
Table 5
24 VDC Connections
Pin Description
1 24V power (red)
2 Not used
3 Not used
4 24V ground (black)
The cold climate kit requires a fused battery switched supply.
Illustration 9 g03382488
Pin positions for connector for a 24Volt system
Illustration 10 g06194947
24Volt fused battery switched supply
Refer to Table ***#i07521590/i07004891.26*** for the pin positions on the connectors. Refer to Illustration ***#i07521590/i07004891.29*** and Illustration ***#i07521590/i07004891.30*** for the wiring diagram for the application harness connection for 24V connections.Wiring for 12V System
Table 6
12 VDC Connections
Pin Description
1 Connect to pin 2 (Connects red to blue)
2 Connect to pin 1 (Connects red to blue)
3 12V power (white)
4 12V ground (black)
The cold climate kit requires a fused battery switched supply.
Illustration 11 g03382491
Pin positions for connector for a 12Volt system
Illustration 12 g06195456
12Volt fused battery switched supply
Refer to Table ***#i07521590/i07004891.32***for the pin positions on the connectors. Refer to Illustration ***#i07521590/i07004891.35*** and Illustration ***#i07521590/i07004891.36*** for the wiring diagram for the application harness connection for 12V connections.