CONTACTOR-PRESSURE 1210037 - Caterpillar

Connection Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     308-3470     Jack Stand Gp     1    
B     260-9412     Chain As     1    
C     4C-5593     Anti-Seize Compound     -    
Illustration 1 g01876458
Note: Do not reuse track bolts. Because the track bolts have been torqued to a yield, the bolts can only be used one time. Failure to replace the track bolts with new track bolts could result in damage to the machine.
Attach Tooling (B) to the track. Raise the track and connect the master links.
Use two people in order to install track shoe (4) . The weight of track shoe (2) is approximately 34 kg (75 lb). Apply Tooling (C) to the threads of bolts (3) . Install track shoe (4) and bolts (3) . Tighten bolts (3) to a torque of 340 70 N m (250 50 lb ft). Tighten bolts (3) to an additional turn of 180 degrees.
Illustration 2 g01876457
Remove Tooling (A) .
Illustration 3 g01876456
Tighten relief valve (2) . Tighten relief valve (2) to a torque of 34 7 N m (25 5 lb ft).
Tighten the track tension. Refer to Operation and Maintenance Manual, "Track - Check/Adjust".
Illustration 4 g01876455
Install cover (1) .