CONTACTOR-TEMPERATURE 7W0705 - Caterpillar

You must read and understand the warnings and instructions contained in the Safety section of this manual before performing any operation or maintenance procedures.Engine Protective Devices
Inspect/Check
An inspection and test should be performed for all alarm and shutoff components Every 1000 Hours.Alarms and shutoffs must work properly in order to provide timely warning to the operator and protection for the engine. It is impossible to tell if the engine protective devices are in good working order during normal operation. Engine malfunctions must be simulated in order to test the alarm and shutoff components.In order to prevent damage to the engine, only authorized service personnel or your Caterpillar dealer should perform the tests. Contact your Caterpillar dealer or refer to the Service Manual for more information.Visual Inspection
Visually check the condition of all gauges, sensors, and wiring. Look for loose, broken, or damaged wiring and components. Repair or replace any damaged wiring or components immediately.Fuel Control Linkage
Check/Lubricate
Check the fuel control linkage for proper operation and make adjustments if necessary. Refer to the Service Manual for the adjustment procedure.
Fuel control linkage grease fittings.Lubricate the fuel control linkage grease fittings with MPG or equivalent grease.