CONTROL G. 0092783 - Caterpillar

1. Remove bolts (1) and cover (2) from the tube assembly. 2. Remove clip (5), and disconnect wires (4).3. Remove cover (2) from the machine.4. Loosen two setscrews (6), and remove magnet assembly (3) from the pin. 5. Remove bolts (7) that hold the block and the magnet assembly to cover (2). 6. Remove magnet assembly (8) and block (9) from cover (2).Install Bucket Positioner Control
1. Put block (3) and magnet assembly (4) in position in cover (2), and install bolts (1) that hold them in place. 2. Put cover (2) in position on the machine, and connect wires (5).3. Install clip (6) that holds wires (5) together.4. Install magnet assembly (8) in the pin, and tighten two setscrews (7) that hold it in position. 5. Put cover (9) in position on the tube assembly, and install two bolts (10) that hold it.6. Make an adjustment to the bucket positioner. See Bucket Positioner Adjustment Procedure in Specifications or Testing And Adjusting of 936 Wheel Loader Hydraulic System.