CONTROL GP- 0R6125 - Caterpillar

Illustration 1 g01618212
Initial auto-level screen (1) Auto-level button (2) Timer (3) Jack retract button (4) Jack extend button (5) Vertical arrows (6) Status IndicatorsIllustration 1 indicates the initial auto-level screen. The auto-level button is in manual mode and the jacks are parked and ready to extend.Auto-level button - This button is used to change between automatic mode and manual mode. The icon at the center of the auto-level button will indicate that the drill is in automatic mode or the drill is in manual mode.
Manual level mode - This button indicates that the system is in manual mode.
Auto-level mode - This button indicates that the system is in auto-level mode. Timer - This field indicates the time in seconds that is spent in the automatic mode.Jack extend button and jack retract button - These buttons are found in the center of the screen under the auto-level button. When one of these buttons is highlighted, that button indicates the direction of the movement for the jacks.
Jack retract button - If this button is highlighted in blue, the jacks will be retracted.
Jack extend button - If this button is highlighted in blue, the jacks are ready to be extended.
Illustration 2 g01618363
Vertical arrowsVertical arrows - The vertical arrows next to each jack indicate the direction of movement for that jack.The arrow that corresponds to the direction of movement will be highlighted in blue. Refer to Illustration 2. An output value from zero to 100 will also be displayed between the arrows when the jacks are moving.Status indicators - There are two status indicators beside each icon for a jack.
Jack retracted indicator - If this indicator is highlighted in blue, the jack is fully retracted.
Jack extended indicator - If this indicator is highlighted in blue, the jack is extended to the ground.
Sensor failure - If this indicator appears, there is a sensor failure.