1076804 CONTROL GP-ENG RATINGS ELEK Caterpillar parts
3176
Rating:
Alternative (cross code) number:
CA1076804
107-6804
1076804
CA1076804
107-6804
1076804
Weight: 1 pounds 0 kg.
TRUCK ENGINE,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$12.62
12 May 2021
0.1[0.05] Pounds
US: LEADERS RPM
Mercury Marine/Mercruiser New OEM Screw @2, 10-76804
Mercury Marine / Mercruiser SKU: 10-76804 || Sold Each || Please verify your own fitment
Mercury Marine / Mercruiser SKU: 10-76804 || Sold Each || Please verify your own fitment
Number on catalog scheme:
For full view, you need register
Compatible equipment models: 1076804:
Information:
Start By:
Remove the tilt cylinder. Refer to Disassembly and Assembly, "Tilt Cylinder - Remove and Install".
Remove the bucket. Refer to Disassembly and Assembly, "Bucket - Remove and Install".
Illustration 1 g01247933
Place suitable cribbing under the front of lift arms (1).
Illustration 2 g01247934
Attach a suitable lifting device to the rod end of lift cylinder (4). The weight of lift cylinder (4) is approximately 60 kg (132 lb). Use Tooling (A) in order to remove retaining ring (2). Remove pin assembly (3). Use the suitable lifting device in order to lower the rod end of lift cylinder (4) away from lift arms (1). Repeat for the other side.
Illustration 3 g01383329
Disconnect hose assemblies (5) and (6) from each side of the machine.
Illustration 4 g01383339
Cut cable straps (7) and disconnect harness assembly (8). Place harness assembly (8) to the side.
Illustration 5 g01383373
Attach Tooling (C), Tooling (D), and a suitable lifting device to lift arms (1). The weight of lift arms (1) is approximately 460 kg (1015 lb).
Illustration 6 g01247938
Illustration 7 g01383377
Use Tooling (B) in order to remove retaining ring (9). Remove pin (10). Remove lift arms (1).
Illustration 8 g01248263
Illustration 9 g01248018
Use Tooling (E) in order to remove bearings (11).
Illustration 10 g01248265
Illustration 11 g01248029
Use Tooling (F) in order to remove bearings (12).
Illustration 12 g01248315
Remove bearings (13).
Remove the tilt cylinder. Refer to Disassembly and Assembly, "Tilt Cylinder - Remove and Install".
Remove the bucket. Refer to Disassembly and Assembly, "Bucket - Remove and Install".
Illustration 1 g01247933
Place suitable cribbing under the front of lift arms (1).
Illustration 2 g01247934
Attach a suitable lifting device to the rod end of lift cylinder (4). The weight of lift cylinder (4) is approximately 60 kg (132 lb). Use Tooling (A) in order to remove retaining ring (2). Remove pin assembly (3). Use the suitable lifting device in order to lower the rod end of lift cylinder (4) away from lift arms (1). Repeat for the other side.
Illustration 3 g01383329
Disconnect hose assemblies (5) and (6) from each side of the machine.
Illustration 4 g01383339
Cut cable straps (7) and disconnect harness assembly (8). Place harness assembly (8) to the side.
Illustration 5 g01383373
Attach Tooling (C), Tooling (D), and a suitable lifting device to lift arms (1). The weight of lift arms (1) is approximately 460 kg (1015 lb).
Illustration 6 g01247938
Illustration 7 g01383377
Use Tooling (B) in order to remove retaining ring (9). Remove pin (10). Remove lift arms (1).
Illustration 8 g01248263
Illustration 9 g01248018
Use Tooling (E) in order to remove bearings (11).
Illustration 10 g01248265
Illustration 11 g01248029
Use Tooling (F) in order to remove bearings (12).
Illustration 12 g01248315
Remove bearings (13).
