CONTROL GP 10R5901 - Caterpillar

1. Make an adjustment to rod (3) so dimension (B), between the centerline of the pins is ... 13.62 in.(345.9 mm)2. Tighten the locknuts on rod (3) to a torque of ... 75 10 lb.ft.(100 14 N m)3. With the flywheel in the ENGAGED position, make an adjustment to the length of rod (4) until dimension (A) between the centerline of control lever (1) and the outer edge of cover (2), is ... 4.29 .12 in.(125.0 3.0 mm)4. Tighten the locknut on rod (4) to a torque of ... 18 5 lb.ft.(24 7 N m)