CONTROL GP-HYDRAULIC PEDAL 1125704 - Caterpillar

1. Drain the coolant from the engine below the level of the water temperature regulator into a suitable container for storage or disposal.
Turbocharger outlet hose removed only for photographic purposes.2. Disconnect the upper radiator hose (previously removed).3. Remove two bolts and elbow (2). Remove the gasket and O-ring seal from the elbow. Check the O-ring and gasket for wear or damage. Replace if necessary.4. Disconnect turbocharger water line (1) from the cover assembly.5. Remove three bolts (3) that hold the water temperature regulator housing (4) to cylinder head assembly (5). 6. Remove water temperature regulator (6) from the housing. Remove gasket, replace if necessary. Remove the seal from the housing. Use Tool (A) to install the seal into the housing if removed. Install the lip-type seal with the lip of the seal away from the regulator. For installation of the water temperature regulator, reverse the removal steps.7. Fill the cooling system to the correct coolant level. See the Operation & Maintenance Manual.