1199737 CONTROL GP-FLOW Caterpillar parts
45
Rating:
Alternative (cross code) number:
CA1199737
119-9737
1199737
CA1199737
119-9737
1199737
Weight: 2 pounds 0 kg.
CHALLENGER,
Compatible equipment models: 1199737:
Number on catalog scheme:
For full view, you need register
Information:
Machine Stopping
Park on a level surface. If it is necessary to park on a grade, block the tires securely.Do not engage the parking/secondary brake while the machine is moving unless an emergency exists.
1. Move the direction and speed control lever to neutral. 2. Apply pressure to the brake pedal to stop machine movement. 3. Pull back on the parking/secondary brake lever to engage the parking/secondary brake.Freezing Conditions
If freezing temperatures are expected, tires should be cleaned of mud and dirt and the machine parked on wood planks.The water spray system and ballast tanks should be drained of water.Engine Stopping
1. Allow the engine to operate at low idle for five minutes. This allows hot areas in the engine to cool gradually, extending engine life. 2. Turn the engine start switch to OFF to stop the engine. Remove the key. 3. Use the steps and handholds, use both hands and face the machine, when dismounting. 4. Inspect the engine compartment for paper and debris. Clean out any debris and paper to avoid a fire. 5. Install all vandalism protection locks and covers.
Park on a level surface. If it is necessary to park on a grade, block the tires securely.Do not engage the parking/secondary brake while the machine is moving unless an emergency exists.
1. Move the direction and speed control lever to neutral. 2. Apply pressure to the brake pedal to stop machine movement. 3. Pull back on the parking/secondary brake lever to engage the parking/secondary brake.Freezing Conditions
If freezing temperatures are expected, tires should be cleaned of mud and dirt and the machine parked on wood planks.The water spray system and ballast tanks should be drained of water.Engine Stopping
1. Allow the engine to operate at low idle for five minutes. This allows hot areas in the engine to cool gradually, extending engine life. 2. Turn the engine start switch to OFF to stop the engine. Remove the key. 3. Use the steps and handholds, use both hands and face the machine, when dismounting. 4. Inspect the engine compartment for paper and debris. Clean out any debris and paper to avoid a fire. 5. Install all vandalism protection locks and covers.
Caterpillar SIS machinery equipment:
Parts control Caterpillar catalog:
3114, 3116, 3126, 35, 446, 446B, 446D, 45, 533, 539, 543, 55, 613C II, 910E, 950F, 953B, 953C, 963B, 963C, AP-1000, AP-1000B, AP-1050, AP-1055B, AP-900B, BG-2455C, BG-245C, CB-434, CB-634, CB-634C, CB...
35, 45, 55
1051695
CONTROL GP-FUEL INJECTION
120H, 120H ES, 120H NA, 135H, 135H NA, 3116, 3126, 320 L, 320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 322C, 322C FM, 325, 325 L, 325B, 325B L, 35, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M,...
120H, 120H ES, 120H NA, 135H, 135H NA, 3116, 3126, 320 L, 320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 322C, 322C FM, 325, 325 L, 325B, 325B L, 35, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M,...
1317964
CONTROL GP-FLOW
35, 45, 55
35, 45, 55
1135715
CONTROL GP-4 WITH HITCH
35, 45, 55
35, 45, 55
1297630
CONTROL GP-STEERING
45, 55
45, 55
1135720
CONTROL GP-4 WITHOUT HITCH
35, 45, 55
35, 45, 55
1128487
CONTROL GP-3 WITH HITCH
35, 45, 55
35, 45, 55
120H, 120H ES, 120H NA, 135H, 135H NA, 3116, 3126, 320B, 322B L, 322B LN, 322C, 322C FM, 325B L, 35, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, 574, 580, 613C II, 928G, 938F, 938G, 950F, 950F ...
1199638
CONTROL-CABLE
35, 45, 55
35, 45, 55
1121784
CONTROL AR-GOVERNOR
135H, 135H NA
135H, 135H NA
8W4740
CONTROL GP-SERVICE BRAKE
120H, 120H ES, 120H NA
120H, 120H ES, 120H NA
1121788
CONTROL AR-GOVERNOR
120H NA
120H NA
1135686
CONTROL GP-3 WITHOUT HITCH
35, 45, 55
35, 45, 55