CONTROL GP-XMSN ELECTRONIC 1261355 - Caterpillar

Replace fuses with the same type and size only. Otherwise, electrical damage can result.If it is necessary to replace fuses frequently, an electrical problem may exist. Contact your Caterpillar dealer.
Illustration 1 g00691994The fuse box is located on the left side of the seat for the operator. The fuse box is located on the floor. Remove the 2 thumb screws (1) which hold the cover on the fuse box in order to expose the fuses.Note: The front head lights, the instrument lights, the dome light, and the red lights on the rear of the scraper are on an automatic breaker. The automatic breaker is located inside the compartment for the fuses.Note: Your machine may not utilize all of the fuses that are listed here.
Fuses - The fuses protect the electrical system from damage that is caused by overloaded circuits. If the element inside the fuse separates, replace the fuse. Check the circuit if the element is separated in the new fuse. Repair the circuit, if necessary.
Illustration 2 g00691997The fuses are numbered left to right. The fuses are numbered from the top to the bottom. A pictograph (15) is located to the right of the fuse holder. The location of the fuse matches the location of the pictograph.
Front and Rear Wiper/Washer (1) - 10 AMP
Air Dryer (2) - 10 AMP
Caterpillar Monitoring System (3) - 10 AMP
Converter (4) - 10 AMP
Electronic Implement Controls (5) - 20 AMP
Differential Lock (6) - 10 AMP
Ether Starting Aid (7) - 10 AMP
Basic Transmission (8) - 10 AMP
Horn (9) - 10 AMP
Rear Work Lights (10) - 10 AMP
Lighter (11) - 10 AMP
Vertical Seat Adjustment (12) - 15 AMP
Work Lights (13) - 10 AMP
Custom Fuel System (14) - 10 AMP