CONTROL GP-ENG RATINGS ELEK 1330142 - Caterpillar

Illustration 12 g02805657The pilot solenoid is located on the hydraulic block.The parking brake solenoid prevents hydraulic movement of the machine.Steering Sensors
Illustration 13 g02915736
View of the base for the handle through the rubber boot on the left-hand side of the operator station
The sensors for the joystick steering are located in the base of the joystick. The entire base must be replaced in the event of a sensor failure.The steering sensors are used to control machine movement forwards, backwards, and turning.Acceleration and Deceleration (Thumb Wheel)
Illustration 14 g02915737
View of the handle on the left-hand side of the operator station
The thumb wheel is located on the joystick for the transmission.The acceleration and deceleration thumb wheel is used to control machine movement speed.Traction Control
Illustration 15 g02915738
View of the handle on the left-hand side of the operator station
The switch is the yellow button that is located on the joystick for the transmission.Horn Switch
Illustration 16 g02915739
View of the handle on the left-hand side of the operator station
The horn switch is the black button that is located on the joystick for the transmission.Pump Solenoids
Illustration 17 g01381476
View of the pumps from the left-hand side of the machine
(5) Left drive hydrostatic piston pump
(6) Forward solenoid
(7) Right drive hydrostatic piston pump
(8) Forward solenoid
(9) Reverse solenoid
(10) Reverse solenoid The forward and the reverse solenoids for the left motor are located on the front pump. The forward and the reverse solenoids for the right motor are located on the rear pump. The solenoids allow oil to flow to the left side motor and the right side motor.Left Track Motor
Illustration 18 g02915897
View of the front of the left motor through the access panel from the bottom of the machine
The motor can be accessed by removing the panel that is located under the machine.
(11) Left Motor Solenoid
(12) Left Track Speed Sensor The left track speed sensor is located on the front of the left motor.The left motor solenoid is located on the front of the left motor.Right Track Motor
Illustration 19 g02915900
View of the front of the right motor through the access panel from the bottom of the machine
The motor can be accessed by removing the panel that is located on the back of the machine.
(13) Right Track Speed Sensor
(14) Right Motor Solenoid The right track speed sensor is located on the front of the right motor.The right motor solenoid is located on the front of the right motor.Backup Alarm
The backup alarm is mounted on the rear of the machine.
Illustration 20 g02915906
View of the alarm through the panel on the rear of the machine from the corner of the right-hand side
Backup alarm - The alarm will sound when the lever for the steering and transmission control is in the REVERSE position. The alarm is used to alert people behind the machine that the machine is backing up.Electronic Control Module
Illustration 21 g02821897The electronic control module is located on the machine right side, in the rear access panel.The electronic control module controls all electronic signals for the implement system, including solenoids, sensors, and switches.