CONTROL GP-XMSN ELECTRONIC 1359474 - Caterpillar

Basic machine shipping specifications are listed below. Actual machine specifications will vary based on attachments used.
Transmission - 4-speed forward and reverse - full synchromesh gearbox. Constant mesh gears on all ratios permits on-the-go shifting 1st through 4th and down 4th through 1st. Neutral start provision prevents starting machine in gear. Transmission DisconnectHand operated power disconnect for on-the-go shifting and fast loader lift, dump and lower with engine running at high rpm. Reversing ShuttleConveniently placed, hand operated lever provides instant direction changes from forward to reverse with power hydraulic clutches. Rear AxleHeavy duty industrial axle with inboard planetary reduction and differential lock. Rear Axle (AWS)Heavy duty industrial axle with planetary reduction in the wheel hub and limited slip differential.
Brakes - Two oil disc brakes on final drive output shafts.Fully enclosed, hydraulic self-energizing oil disc brakes on final drive output shaft. Foot operated, pedal interlock for roading, or independently for working applications. Front AxleOscillation 11° each direction from centerline.Switch on instrument panel engages front wheel drive (if equipped), on the move, in any gear, forward or reverse.Final drive from differential to front wheels by way of planetary reduction in each wheel. Planetary units can be removed independently of wheels. On-the-go shifting 1st through 4th and down 4th through 1st is retained in 4-WD. Travel SpeedThe following travel speeds are for a standard 416B Backhoe Loader, equipped with 16.9 x 24 rear tires, at full throttle. The following travel speeds are for a standard 426B Backhoe Loader, equipped with 16.9 x 24 rear tires, at full throttle. The following travel speeds are for a standard 428B/436B and 438B AWS Backhoe Loader, equipped with 16.9/14 x 28 rear tires, at full throttle. The following travel speeds are for a standard 438B Backhoe Loader, equipped with 19.5L x 24 rear tires, at full throttle. The following travel speeds are for a standard 438B and 438B AWS Backhoe Loader, equipped with 18.4/15 x 26 rear tires, at full throttle.
Steering - Steering unit provides manual steering capability in case of power failure.Type ... Front and [Rear (AWS only)] wheelPower steering ... HydrostaticCylinder ... Double acting
Backhoe Buckets
Loader Buckets 9R5866 special uni-tooth is available for all loader buckets.Rated Bucket Applications/Loader Stability
The following information information provides the rated operating loads for a standard machine configuration. The corresponding reaches (from the grille to the cutting edge tip) and heights (to the bucket hinge pin) are given. The rated operating load represents the greatest load that can be manipulated through the full range of motion with the loader bucket tilted fully back. Loads shown in the chart with a "1" are hydraulically limited, while others are limited by tipping criteria. Rated Load for Fork Application
The following information provides the rated operating loads for fork pallet stability. The corresponding reaches (from the grille to the cutting edge tip) and heights (to the bucket hinge pin) are given. The rated operating load represents the greatest fork load that can be manipulated through the full range of motion with