CONTROL GP-XMSN ELECTRONIC 1410381 - Caterpillar

Illustration 1 g00638222
Charging System (1) - This alert indicator appears on the Type II console. The alert indicator comes on if there is a malfunction in the electrical system. If this alert indicator comes on, the system voltage is too high for normal machine operation or too low for normal machine operation. If electrical loads (air conditioning and/or lighting) are high and the engine speed is near idle, increase the engine speed to high idle. This will generate more output from the alternator. If the alert indicator for the electrical system turns off within one minute, the electrical system is probably operating in a normal manner. However, the electrical system may be overloaded during periods of low engine speeds.Modify the operating cycle in order to prevent overloading the electrical system and discharging the batteries.Low idle must be set correctly. Adjust for the high side of the Low Idle specification while the most often used electrical loads are turned on. In order to reduce the loads, use the Medium fan speed instead of the High fan speed.If this procedure does not cause the alert indicator to turn off, move to a convenient location. Investigate the cause (loose alternator belt, broken alternator belt, faulty batteries, etc).If the engine speed is near operating speeds and if the electrical loads are light, the alert indicator may remain on. If the alert indicator remains on, move to a convenient location. Investigate the cause (loose alternator belt, broken alternator belt, faulty batteries, etc).
Brake Oil Level (2) - The alert indicator will light when the brake reservoir oil is low. If this alert indicator comes on, stop the machine immediately. Investigate the cause and add oil to the correct level. Do not operate the machine if the indicator light stays on.
Engine Coolant (3) - The alert indicator will light when the engine coolant temperature is too high. If this alert indicator comes on, stop the machine immediately. Stop the engine and investigate the cause.
Engine Oil Pressure (4) - The alert indicator will light when the engine oil pressure is low. If this alert indicator comes on, stop the machine immediately. Stop the engine and investigate the cause.
Illustration 2 g00290211
Parking Brake (5) - The alert indicator will light when the parking brake is engaged. The alert indicator should come on during start-up. The alert indicator should go out when the parking brake is released.
High Beams (6) - The alert indicator will light when you press the top of the dimmer switch (7). The alert indicator should go out when you press the bottom of the dimmer switch.
Illustration 3 g00505698
All Wheel Steer (AWS) (8) - The alert indicator will light when the All Wheel Steer switch (9) is moved to the Circle Steer Mode or to the Crab Steer Mode.