CONTROL & LINES GP-RIDE 1445728 - Caterpillar

TYPE="LEVEL" DEPTH="1" @@@-->Stopping Procedure for the MCS Control Panel
Illustration 1 g02162627
Typical example
(1) Isolator Keyswitch
Illustration 2 g02162635
Typical example
(2) Stop key
Open the circuit breaker and remove the load from the generator.
When possible, allow the engine to operate without load for 3 minutes, in order to cool the engine. Note: Pressing the stop key bypasses the cooldown period.
Press and release the "Stop" key (2).
The LCD display will indicate "STOPPING". Note: If the engine fails to stop running, the LCD display will indicate "STOP FAILURE". The alarm will sound.
Once the engine has stopped, the LCD display will indicate "STOPPED". Note: The engine can auto start. Ensure that the power supply is isolated before any service or repair is performed.
Turn the isolator keyswitch (1) to the OFF position.