1612355 CONTROL GP-UNPROGRAMMED Caterpillar parts
621G, 623G, 627G, 631G, 637G, 657E, 725, 730, 735, 740, AP-655C
Rating:
Alternative (cross code) number:
CA1612355
161-2355
1612355
CA1612355
161-2355
1612355
Weight: 4 pounds 2 kg.
ARTICULATED TRUCK, WHEEL TRACTOR,
Related part:
1612355
CONT GP -E
10R5610
R
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
WZCNLXLX Excavator ECU Controller 161-2355 1612355 for CAT 621G 657E 725
WZCNLXLX Item Name:ECU Controller || Item Number:161-2355 1612355 || Application:For CAT 621G, 623G, 627G, 631G, 637G, 657E, 725, 730, 735, 740, AP-655C || Note: If you are unsure if the product is suitable.In order not to delay your use of the parts, please provide your engine nameplate or serial number and part number, and we will help you confirm if it is suitable. To avoid unnecessary returns, please check the product image and part number to ensure it is the product you want. || Tip: Please contact us - we are a professional sales team and we have many products to offer to you. Many buyers are very satisfied with our service. You can get first-class products and high-quality services from us, believe me, you will have a pleasant shopping experience here.
WZCNLXLX Item Name:ECU Controller || Item Number:161-2355 1612355 || Application:For CAT 621G, 623G, 627G, 631G, 637G, 657E, 725, 730, 735, 740, AP-655C || Note: If you are unsure if the product is suitable.In order not to delay your use of the parts, please provide your engine nameplate or serial number and part number, and we will help you confirm if it is suitable. To avoid unnecessary returns, please check the product image and part number to ensure it is the product you want. || Tip: Please contact us - we are a professional sales team and we have many products to offer to you. Many buyers are very satisfied with our service. You can get first-class products and high-quality services from us, believe me, you will have a pleasant shopping experience here.
Qiape 161-2355 1612355 controller Fits for Caterpillar CAT 623G 637G 631G 621G Wheel Tractor 730 740 725 735 Articulated Truck AP-655C BG-2255C Asphalt Paver
Qiape Product Name: 161-2355 1612355 controller || Part number: 161-2355 1612355 || Condition: New || Fits for Caterpillar CAT 623G 637G 631G 621G Wheel Tractor 730 740 725 735 Articulated Truck AP-655C BG-2255C Asphalt Paver || Note: Please confirm that the product shown in the part number is what you need. If you cannot confirm, you can leave us a message and provide your engine serial number and nameplate.
Qiape Product Name: 161-2355 1612355 controller || Part number: 161-2355 1612355 || Condition: New || Fits for Caterpillar CAT 623G 637G 631G 621G Wheel Tractor 730 740 725 735 Articulated Truck AP-655C BG-2255C Asphalt Paver || Note: Please confirm that the product shown in the part number is what you need. If you cannot confirm, you can leave us a message and provide your engine serial number and nameplate.
This part in 8 request:
Show.
This information for suppliers only!
2024-09-12
2023-01-03
2023-01-03
2020-06-09
2019-09-05
2018-06-11
2017-02-13
2017-02-09
Number on catalog scheme:
15
For full view, you need register
Compatible equipment models: 1612355:
Information:
Relieving Track Tension
Hydraulic Adjusting Type
Remove any dirt or debris that could prevent retraction of the idler. Clean the track adjuster vent holes thoroughly.
Before attempting to separate the track or remove any part of the track adjusting mechanism, be certain the hydraulic pressure in the track adjusting cylinder is completely relieved and the cylinder (4) can be moved to the rear into the recoil spring front pilot (5).
HYDRAULIC TRACK ADJUSTER
1. Relief valve. 2. Fill valve. 3. Vent holes. 4. Cylinder. 5. Recoil spring front pilot.Relieve the pressure in the hydraulic track adjuster cylinder, WITH CAUTION as given in the following steps:
Because of the hydraulic pressure in the track adjuster cylinder, never visually inspect the vent holes (3) or valves to see if lubricant is escaping. Always watch the cylinder (4) to see if it moves to the rear into the recoil spring front pilot (5).
1. Loosen the RELIEF valve (1) one turn. Lubricant should escape from the vent holes just below the RELIEF valve. Wait momentarily. If the cylinder (4) does not retract, loosen the FILL valve (2) one turn.2. If the cylinder has not retracted, loosen the RELIEF valve until it contacts the underside of the guard. If the cylinder does not retract, loosen the FILL valve until it contacts the underside of the guard.3. If track tension is still evident, start the machine and move it backward and forward.4. If moving the machine has not relieved all the tension, put a drawbar pin between the sprocket and track. Back the machine slightly putting additional tension on the track to force the lubricant out of the vent holes.Screw Adjusting Type
SCREW TYPE TRACK ADJUSTER
1. Clamp bolts. 2. Screw assembly. 3. Adjusting nut.To loosen the track, loosen clamp bolts (1). Turn screw assembly (2) into the recoil spring adjusting nut (3).Filling And Bleeding The Hydraulic Track Adjuster
Use the following procedure to bleed the air on the initial filling of the hydraulic track adjuster cylinder.
HYDRAULIC TRACK ADJUSTER
1. Fill valve. 2. Relief valve. 3. Relief valve vent holes.1. Loosen the relief valve (2) one turn. Force SAE 30 lubricating oil through the fill valve.2. When the oil flowing out the relief valve vent hole (3) no longer contains air bubbles, close the relief valve. Continue filling the cylinder with oil until the track adjustment is correct. See the correct POWER TRAIN SPECIFICATIONS book for the correct track adjustment.3. Move the machine backward and forward to equalize the adjustment. Recheck the adjustment.4. Make subsequent track adjustments as outlined in the Lubrication and Maintenance Guide section of the Service Manual.Sprocket Segment Removal And Installation
SEGMENT REMOVAL
1. Solid pin. 2. Sprocket segment.1. Remove sprocket guards.2. All tension must be removed from the track. See subject RELIEVING TRACK TENSION.3. Place a solid pin (1) between two front teeth of sprocket segment.4. Move the vehicle backward to lift the track from the sprocket.5. Remove nuts, bolts and sprocket segment (2).6. Install sprocket segment with word "OUT" to outside. Put lubricant on bolt and nut threads and tighten all
Hydraulic Adjusting Type
Remove any dirt or debris that could prevent retraction of the idler. Clean the track adjuster vent holes thoroughly.
Before attempting to separate the track or remove any part of the track adjusting mechanism, be certain the hydraulic pressure in the track adjusting cylinder is completely relieved and the cylinder (4) can be moved to the rear into the recoil spring front pilot (5).
HYDRAULIC TRACK ADJUSTER
1. Relief valve. 2. Fill valve. 3. Vent holes. 4. Cylinder. 5. Recoil spring front pilot.Relieve the pressure in the hydraulic track adjuster cylinder, WITH CAUTION as given in the following steps:
Because of the hydraulic pressure in the track adjuster cylinder, never visually inspect the vent holes (3) or valves to see if lubricant is escaping. Always watch the cylinder (4) to see if it moves to the rear into the recoil spring front pilot (5).
1. Loosen the RELIEF valve (1) one turn. Lubricant should escape from the vent holes just below the RELIEF valve. Wait momentarily. If the cylinder (4) does not retract, loosen the FILL valve (2) one turn.2. If the cylinder has not retracted, loosen the RELIEF valve until it contacts the underside of the guard. If the cylinder does not retract, loosen the FILL valve until it contacts the underside of the guard.3. If track tension is still evident, start the machine and move it backward and forward.4. If moving the machine has not relieved all the tension, put a drawbar pin between the sprocket and track. Back the machine slightly putting additional tension on the track to force the lubricant out of the vent holes.Screw Adjusting Type
SCREW TYPE TRACK ADJUSTER
1. Clamp bolts. 2. Screw assembly. 3. Adjusting nut.To loosen the track, loosen clamp bolts (1). Turn screw assembly (2) into the recoil spring adjusting nut (3).Filling And Bleeding The Hydraulic Track Adjuster
Use the following procedure to bleed the air on the initial filling of the hydraulic track adjuster cylinder.
HYDRAULIC TRACK ADJUSTER
1. Fill valve. 2. Relief valve. 3. Relief valve vent holes.1. Loosen the relief valve (2) one turn. Force SAE 30 lubricating oil through the fill valve.2. When the oil flowing out the relief valve vent hole (3) no longer contains air bubbles, close the relief valve. Continue filling the cylinder with oil until the track adjustment is correct. See the correct POWER TRAIN SPECIFICATIONS book for the correct track adjustment.3. Move the machine backward and forward to equalize the adjustment. Recheck the adjustment.4. Make subsequent track adjustments as outlined in the Lubrication and Maintenance Guide section of the Service Manual.Sprocket Segment Removal And Installation
SEGMENT REMOVAL
1. Solid pin. 2. Sprocket segment.1. Remove sprocket guards.2. All tension must be removed from the track. See subject RELIEVING TRACK TENSION.3. Place a solid pin (1) between two front teeth of sprocket segment.4. Move the vehicle backward to lift the track from the sprocket.5. Remove nuts, bolts and sprocket segment (2).6. Install sprocket segment with word "OUT" to outside. Put lubricant on bolt and nut threads and tighten all
Caterpillar parts catalog:
Parts control Caterpillar catalog:
140G, 3126B, 3412E, 3606, 3608, 3612, 3616, 621B, 627F, 631D, 637D, 657E, 725, 730, 735, 740, 770, 772, 815B, 824C, 844K, 854K, 938H, 950H, 953D, 962H, 963D, 966H, 972H, 973D, 980C, 980G, 980H, 990K, ...
24H, 3408E, 3412E, 5110B, 631D, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 69D, 769C, 769D, 771D, 773B, 773D, 773E, 775B, 775D, 775E, 834B, 836, 844, 988B, 988F II, 990, 990 II, 992C, AD45, AE40 II,...
1069188
CONTROL GP-RELAY ELECTRONIC
120H, 12H, 135H, 140H, 160H, 621F, 627F, 631E, 633E II, 637E, 651E, 657E, D10R
120H, 12H, 135H, 140H, 160H, 621F, 627F, 631E, 633E II, 637E, 651E, 657E, D10R
1498217
CONTROL AS-BOARD
611, 613C II, 615C, 621F, 621G, 623E, 623F, 623G, 627F, 627G, 631G, 637G, 725, 730, 735, 740, D250E, D250E II, D300E, D300E II
611, 613C II, 615C, 621F, 621G, 623E, 623F, 623G, 627F, 627G, 631G, 637G, 725, 730, 735, 740, D250E, D250E II, D300E, D300E II
1634066
CONTROL GP-MONITOR
621G, 623G
621G, 623G
2038504
CONTROL GP-MONITOR
621G, 623G, 627G
621G, 623G, 627G
2524503
CONTROL GP-UNPROGRAMMED
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H, 16H, 5110B, 621G, 623G, 627G, 631G, 637G, 657G, 725, 730, 735, 740, 769D, 771D, 773D, 773E, 775D, 775E, 776D, 777D, 950G, 962G, 966G, 972G, AD30, AD45B, A...
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H, 16H, 5110B, 621G, 623G, 627G, 631G, 637G, 657G, 725, 730, 735, 740, 769D, 771D, 773D, 773E, 775D, 775E, 776D, 777D, 950G, 962G, 966G, 972G, AD30, AD45B, A...
1863167
CONTROL GP-MONITOR
631G, 637G
631G, 637G
725, 730, 735, 740
725, 730, 735, 740
3781171
CONTROL GP-GRADE & SLOPE
AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-655C, AP-655D, AP-900B, AP1000E, AP1055E, AP555E, BG-2455D, BG-245C, BG-260D, BG1000E, BG1055E, BG500E
AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-655C, AP-655D, AP-900B, AP1000E, AP1055E, AP555E, BG-2455D, BG-245C, BG-260D, BG1000E, BG1055E, BG500E
1569549
CONTROL GP-FAN REVERSING
345B II, 938G, 950G, 966G
345B II, 938G, 950G, 966G
1162026
CONTROL AS-ELECTRONIC
910E, 914G, 928G, 938G, 950G, 962G, 966G, 972G, IT12B, IT14G, IT28G, IT38G, IT62G
910E, 914G, 928G, 938G, 950G, 962G, 966G, 972G, IT12B, IT14G, IT28G, IT38G, IT62G
2627473
CONTROL GROUP
D6R III
D6R III
1547444
CONTROL ASSEM.
D6R II
D6R II
9W0009
CONTROL GP-TMSN ELECTRONIC
621E, 627E, 637E, 651E, 657E
621E, 627E, 637E, 651E, 657E
6T6590
CONTROL GP
637E, 651E, 657E, 777, 785
637E, 651E, 657E, 777, 785
3T8230
CONTROL GP-ELECTRONIC
651E, 657E
651E, 657E
621E, 623E, 627E, 627F, 631E, 637E, 651E, 657E, 768C, 769C, 771C, 772B, 773B, 776C, 777B, 784B, 785, 785B, 789, 789B, 793B
9W1062
CONTROL GP-ELECTRONIC
623E, 627E, 637E, 651E, 657E, 768C, 769C, 772B, 773B, 777B, 785, 789
623E, 627E, 637E, 651E, 657E, 768C, 769C, 772B, 773B, 777B, 785, 789
1069188
CONTROL GP-RELAY ELECTRONIC
120H, 12H, 135H, 140H, 160H, 621F, 627F, 631E, 633E II, 637E, 651E, 657E, D10R
120H, 12H, 135H, 140H, 160H, 621F, 627F, 631E, 633E II, 637E, 651E, 657E, D10R