1663405 CONTROL AR-HYDRAULIC Caterpillar parts
16H
Rating:
Alternative (cross code) number:
CA1663405
166-3405
1663405
CA1663405
166-3405
1663405
MOTOR GRADER,
Compatible equipment models: 1663405:
For full view, you need register
Information:
Hot oil and components can cause personal injury.Do not allow hot oil or components to contact skin.
Illustration 1 g02062880The oil plugs are located on both sides of the machine on top of the rear track roller frame.
Park the machine on level ground.
Remove the oil plug on one side of the machine. Check the oil level. The oil level should be at the bottom of the threaded hole.
If necessary, add oil in order to bring the oil level up to the bottom of the threaded hole. Reference: See Operation and Maintenance Manual, "Lubricant Viscosities" in this manual for the correct viscosity grade.
Install the oil plug.
Repeat Steps 2 through 4 on the other side of the machine.
Caterpillar SIS machinery equipment:
Parts control Caterpillar catalog:
120H, 135H, 140H, 143H, 14H, 160H, 163H, 16H, 3126B, 322C, 322C FM, 325C, 325C FM, 570B, 651B, 725, 730, 735, 740, 814F, 815F, 816F, 824C, 824G II, 825G II, 826G II, 834G, 836G, 938G II, 950G II, 962G...
140H, 143H, 14H, 160H, 163H, 16H, 3406E, 572R II, 725, 730, 735, 740, 938G II, 950G II, 962G II, 966G II, 972G II, C-10, C-12, C-15, D5N, D6N, D7R II, IT38G II, IT62G II
1847307
CONTROL AR-HYDRAULIC
120H, 12H, 140H, 143H, 160H, 163H, 16H
120H, 12H, 140H, 143H, 160H, 163H, 16H
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H, 16H, 924G, 924GZ, D6R II, D7R II, IT28G
7I4720
CONTROL GP-STEERING
16H, 16H NA
16H, 16H NA
1326640
CONTROL GP-SECONDARY STEERING
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H, 16H, 515, 525, 525B, 535B, 545, M312, M315, M318, M320
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H, 16H, 515, 525, 525B, 535B, 545, M312, M315, M318, M320
1737375
CONTROL GP-CENTERSHIFT LOCK
14H, 16H
14H, 16H
8E4132
CONTROL GP-TRANSMISSION HYD
14H, 14H NA, 16H, 16H NA
14H, 14H NA, 16H, 16H NA