CONTROL GP- 1780459 - Caterpillar

The Suspension Cylinder (Front) - Purge and Charge section of RENR2615; Testing and Adjusting/797 Off-Highway Truck Suspension Cylinder/Testing and Adjusting Section contains the following changes: Setting Up For MeasurementThe dimension for the nitrogen charging procedure should be changed to the following:265.0 mm (10.43 in) + 58.2 mm (2.25 in) = 323.2 mm (12.68 in) Nitrogen Charging ProcedureThe regulated pressure that is referenced in Step 7 should be changed to 2791 kPa (405.1 psi).The Suspension Cylinder (Rear) - Purge and Charge section of RENR2615; Testing and Adjusting/797 Off-Highway Truck Suspension Cylinder/Testing and Adjusting Section contains the following change: Setting Up For MeasurementTable 5 should be changed to the following: In Step 5, the corrected guidelines for the nitrogen charging procedure should be changed to the following:120.7 mm (4.75 in) + 23 mm (0.9 in) = 143 mm (5.61 in) 133.4 mm (5.25 in) + 23 mm (0.9 in) = 155 mm (6.11 in)The Worksheets section of RENR2615; Testing and Adjusting/797 Off-Highway Truck Suspension Cylinder/Testing and Adjusting Section contains the following change: Charging The Front Suspension CylinderTable 20 should be changed to the following: COPYRIGHT 1999 CATERPILLAR ALL RIGHTS RESERVED