1791747 CONTROL GP-ENGINE ELECTRONIC Caterpillar parts
3406E, C-10, C-12, C-15, C-16, C16
Rating:
Alternative (cross code) number:
CA1791747
179-1747
1791747
CA1791747
179-1747
1791747
Weight: 5 pounds 2 kg.
INDUSTRIAL ENGINE, TRUCK ENGINE,
You can buy:
This part in 2 request:
Show.
This information for suppliers only!
2019-05-28
2017-07-24
Compatible equipment models: 1791747:
Number on catalog scheme:
1
For full view, you need register
Information:
Illustration 1 g01387076
Run the machine and operate the machine for five minutes before you change the oil. This will suspend any foreign particles that are present in the oil. Running the machine will also provide a more accurate S O S analysis.
Position one final drive so that the oil fill/drain plug (1) is at the bottom.Note: Refer to Operation and Maintenance Manual, "General Hazard Information" for information on Containing Fluid Spillage.
Remove the oil fill/drain plug (1). Allow the oil to drain into a suitable container.
Clean the plug and inspect the O-ring seal. If wear or damage is evident, replace the oil fill/drain plug and/or the O-ring seal.
Install the oil fill/drain plug (1) .
Rotate the final drive so that the oil fill/drain plug is horizontal.
Fill the final drive to the bottom of the opening on the oil fill/drain plug. See Operation and Maintenance Manual, "Lubricant Viscosities" and Operation and Maintenance Manual, "Capacities (Refill)".
Install the oil fill/drain plug.
Perform Step 2 to Step 8 on the other final drive. Use a different container for the oil so that the oil samples from the final drives will be separate.
Completely remove the oil that has spilled onto surfaces.
Start the engine. Operate the machine in the FORWARD direction and in the REVERSE direction.
Apply the parking brake.
Stop the engine. Check the oil level.
Check the drained oil for metal chips. Under normal operation, small grains of metal will be present in the oil. If there are large chips of metal in the oil, contact your local Caterpillar dealer.
Properly dispose of the drained material. Obey local regulations for the disposal of the material.
Caterpillar SIS machinery equipment:
Caterpillar SIS
C-10 Truck Engine 3CS00001-UP »
179-1747
CONTROL GP-ENGINE ELECTRONIC
C-12 Truck Engine 2KS00001-UP »
179-1747
CONTROL GP-ENGINE ELECTRONIC
3406E Truck Engine 2WS00001-UP »
179-1747
CONTROL GP-ENGINE ELECTRONIC
3406E Truck Engine 1MM00001-UP »
179-1747
CONTROL GP-ENGINE ELECTRONIC
C-15 Truck Engine 6NZ00001-UP »
179-1747
CONTROL GP-ENGINE ELECTRONIC
C-16 Truck Engine 7CZ00001-UP »
179-1747
CONTROL GP-ENGINE ELECTRONIC
C-10 Industrial Engine BCX00001-UP »
179-1747
CONTROL GP-ENGINE ELECTRONIC
C-12 Industrial Engine BDL00001-UP »
179-1747
CONTROL GP-ENGINE ELECTRONIC
C-12 Truck Engine CPD00001-UP »
179-1747
CONTROL GP-ENGINE ELECTRONIC
C-16 Truck Engine W1A00001-UP »
179-1747
CONTROL GP-ENGINE ELECTRONIC
Caterpillar parts catalog:
Parts control Caterpillar catalog:
140G, 3126B, 3412E, 3606, 3608, 3612, 3616, 621B, 627F, 631D, 637D, 657E, 725, 730, 735, 740, 770, 772, 815B, 824C, 844K, 854K, 938H, 950H, 953D, 962H, 963D, 966H, 972H, 973D, 980C, 980G, 980H, 990K, ...
1473018
CONTROL GP-ENGINE ELECTRONIC
3126B, 3406E, C-12
3126B, 3406E, C-12
1701209
CONTROL & MTG GP-ENGINE ELEK
3406E, C-15
3406E, C-15
1617066
CONTROL & MTG GP-ENGINE ELEK
C-15, C-16, C-18, C16, C18
C-15, C-16, C-18, C16, C18
1894669
CONTROL & MTG GP-ENGINE ELEK
C-10, C-12
C-10, C-12
4174722
CONTROL GP-UNPROGRAMMED
14M, 16M, 24M, 3054C, 3126, 3126B, 3304, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3412, 3412E, 3508C, 3512, 3512B, 3512C, 3516C, C-10, C-12, C-15, C11, C13, C15, C18, C27, C32, C4.4, C7, C9, CX31-C13I, ...
14M, 16M, 24M, 3054C, 3126, 3126B, 3304, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3412, 3412E, 3508C, 3512, 3512B, 3512C, 3516C, C-10, C-12, C-15, C11, C13, C15, C18, C27, C32, C4.4, C7, C9, CX31-C13I, ...
4174723
CONTROL GP-UNPROGRAMMED
3054C, 3126, 3126B, 3304, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3412, 3412E, 3508C, 3512, 3512B, 3512C, 3516C, C-10, C-15, C11, C13, C15, C18, C27, C32, C4.4, C7, C9, CX31-C13I, CX31-C15I, G3306, G34...
3054C, 3126, 3126B, 3304, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3412, 3412E, 3508C, 3512, 3512B, 3512C, 3516C, C-10, C-15, C11, C13, C15, C18, C27, C32, C4.4, C7, C9, CX31-C13I, CX31-C15I, G3306, G34...
3024, 3116, 3126, 3126B, 3126E, 3176B, 3406E, C-10, C-12, C-15, C-16, C-9, C11, C13, C15, C7, C9, CX28, CX31, CX35, DEUCE, TH31-E61, TH35-C13T, TH35-C15T
1346695
CONTROL AS-ELECTRONIC
3406E, C-10, C-12, C-15, C-16
3406E, C-10, C-12, C-15, C-16
1666356
CONTROL GP-ENGINE ELECTRONIC
C-10, C-12
C-10, C-12
3406E, C-10, C-12, C-15, C-16
3406E, C-10, C-12, C-15, C-16, C16
1863183
CONTROL AR-FLOW
322B LN
322B LN
1857343
CONTROL AR-FLOW
322B LN
322B LN
1538253
CONTROL AR-COUPLER
322B LN
322B LN
1374755
CONTROL GP-SERVICE BRAKE
D250E II, D300E II
D250E II, D300E II
1485530
CONTROL GP-RETARDER
D250E II, D300E II
D250E II, D300E II
1512491
CONTROL GP-DIFFERENTIAL LOCK
D250E II, D300E II
D250E II, D300E II
1729386
CONTROL GP-POWER TRAIN
D250E II
D250E II
1473018
CONTROL GP-ENGINE ELECTRONIC
3126B, 3406E, C-12
3126B, 3406E, C-12