1799346 CONTROL GP-AUTOSHIFT Caterpillar parts
924G, 928G, IT28G
Rating:
Alternative (cross code) number:
CA1799346
179-9346
1799346
CA1799346
179-9346
1799346
Weight: 3 pounds 1 kg.
INTEGRATED TOOLCARRIER, WHEEL LOADER,
This part in 2 request:
Show.
This information for suppliers only!
2022-10-26
2017-05-10
Compatible equipment models: 1799346:
Number on catalog scheme:
10
For full view, you need register
Information:
Illustration 1 g00813712
Schematic
Illustration 2 g01007882
P1 ECM connectorTest Step 1. Inspect Electrical Connectors and Wiring
Turn the keyswitch to the OFF/RESET position.
Thoroughly inspect the J1/P1 ECM connector and all other connectors in the circuit. Refer to Troubleshooting, "Electrical Connectors - Inspect" for details.Expected Result:All connectors, pins, and sockets are completely inserted and coupled. The harness and wiring are free of corrosion, of abrasion, and of pinch points. All connections and grounds are tight and free of corrosion.Results:
OK - The connectors and the wiring appear to be OK. Proceed to Test Step 2.
Not OK - There is a problem with the connectors and/or the wiring.Repair: Repair the circuit.Verify that the repair
Caterpillar parts catalog:
Parts control Caterpillar catalog:
910E, 910G, 914G, 918F, 924F, 924G, 924GZ, 924H, 924HZ, 928F, 928G, 928HZ, 930G, 938F, 938G, 938G II, 938H, 950G, 950G II, 962G, 962G II, 966G, 966G II, 972G, 972G II, 980G II, 980H, 988F, 988F II, 99...
416C, 420D, 420E, 426C, 428C, 428D, 428E, 430D, 430E, 432D, 432E, 434E, 436C, 438C, 438D, 442D, 442E, 444E, 902, 906, 908, 910E, 914G, 918F, 924F, 924G, 924GZ, 924H, 924HZ, 928F, 928G, 928HZ, 930G, 93...
924G, 928G, 938G, 938G II, 938H, IT28G, IT38G, IT38G II, IT38H
1443903
CONTROL AS-ELECTRONIC
924G, 928G, 938G, D250E II, D300E II, D350E II, D400E II, IT28G, IT38G
924G, 928G, 938G, D250E II, D300E II, D350E II, D400E II, IT28G, IT38G
1308278
CONTROL GP-XMSN ELECTRONIC
928G, IT28G
928G, IT28G
1476834
CONTROL GP-AUTOSHIFT
928G, IT28G
928G, IT28G
924G, 928G, IT28G
1707597
CONTROL GP-XMSN ELECTRONIC
924G, 928G, IT28G
924G, 928G, IT28G
1903062
CONTROL GP-POWER TRAIN
924G, 928G, IT28G
924G, 928G, IT28G
2085830
CONTROL GP-ELECTRONIC
924G, 924GZ, 928G, IT28G
924G, 924GZ, 928G, IT28G
2085831
CONTROL AS
924G, 924GZ, 928G, IT28G
924G, 924GZ, 928G, IT28G
1707597
CONTROL GP-XMSN ELECTRONIC
924G, 928G, IT28G
924G, 928G, IT28G
924G, 928G, IT28G
1476834
CONTROL GP-AUTOSHIFT
928G, IT28G
928G, IT28G
1308278
CONTROL GP-XMSN ELECTRONIC
928G, IT28G
928G, IT28G
1443903
CONTROL AS-ELECTRONIC
924G, 928G, 938G, D250E II, D300E II, D350E II, D400E II, IT28G, IT38G
924G, 928G, 938G, D250E II, D300E II, D350E II, D400E II, IT28G, IT38G
1522668
CONTROL AS-ELECTRONIC
938F, 950F II, 950G, 960F, 962G, 966F II, 970F, 980G, IT38F
938F, 950F II, 950G, 960F, 962G, 966F II, 970F, 980G, IT38F
1667237
CONTROL GP-MONITOR
824G, 825G, 826G, 950G, 962G, 966G, 972G, 980G, IT62G
824G, 825G, 826G, 950G, 962G, 966G, 972G, 980G, IT62G
1266010
CONTROL AS
824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 834G, 834H, 836G, 836H, 950G, 962G, 966G, 972G, 980G, 988G, 988H, IT62G
824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 834G, 834H, 836G, 836H, 950G, 962G, 966G, 972G, 980G, 988G, 988H, IT62G
1333906
CONTROL GP
657E
657E
1569633
CONTROL GP-HYDRAULIC HAND
631E, 637E
631E, 637E
2085830
CONTROL GP-ELECTRONIC
924G, 924GZ, 928G, IT28G
924G, 924GZ, 928G, IT28G
1903062
CONTROL GP-POWER TRAIN
924G, 928G, IT28G
924G, 928G, IT28G