CONTROL GP-WINCH HYDRAULIC 1875392 - Caterpillar

1. Move the engine enclosure raise/lower switch (1) up to raise the engine enclosure. 2. Raise engine enclosure (2) as shown. 3. Disconnect two electrical wires (3) from the backup alarm (4).4. Remove the cable ties that fasten wiring harness (5) to the backup alarm. 5. Attach lifting straps and Tool (A) to engine enclosure (2). 6. Remove bolt (6) and pin (7). Move actuator (8) out of the way. 7. Remove bolt (9) from engine enclosure (2) and remove the engine enclosure. The weight of the engine enclosure is 136 kg (300 lb). To install the engine enclosure, reverse the removal steps.