CONTROL GP-POWER TRAIN 1915020 - Caterpillar

146-2726 Maintenance Tool Group(1) 6V-9124 Screwdriver - used for terminal strips.(2) 146-2739 Adapter, Cylinder Pressure - connects outside air pressure source to cylinders on 3500 and 3600 Engines during cylinder leak down testing.(3) 9U-7330 Multimeter - test and adjust electrical circuits.(4) 148-2997 Tool Kit, Valve Recession - measures valve seat recession by placing magnetic block on top of valve rotator with rod extending to top of cylinder head (used with 6V-3075 Dial Indicator on 3600 gas and diesel engines).(5) 138-7573 Bracket, Link - turbo lift bracket.(6) 146-2742 Tool, GAV Lash - set gas admission valve (GAV) lash by installing in valve cover base rear bolt hole and adjusting 5P-2056 Indicator Tip on gas admission rocker arm flat (use with 147-5536 Indicator Contact Point and 6V-3075 Indicator on gas admission rocker arms with pin).(7) 143-8995 Tool, Leak Down - tests check valves in prechamber.(8) 9U-6644 Support - turbo support.(9) 4C-6593 Adjusting Tool - check and adjust valve lash.(10) 146-2728 Pickup Tool, Flex - remove check valve seal.(11) 1P-0529 Handle - waste gate tool.(12) 9U-6248 Bolt, Guide - install equally spaced bolts in outer ring of holes in back of turbocharger compressor housing during assembly.(13) 9U-7516 Gauge, Spark Plug - check spark plug gap.(14) 9U-7511 Seat Cleaner - spark plug seat cleaner.(15) 1P-0462 Plate, Drive - waste gate tool.(16) 6L-5897 Bolt - waste gate tool.(17) 143-8997 Valve, Check - checks leak down fixture (143-8995) before testing check valves.(18) 4C-4601 Socket, Spark Plug - remove and install spark plugs.(19) 9S-5031 Socket - removes combustion sensor spark plug.(20) Carrying Case.Not Shown:* 1U-8860 Pickup Group, Blowby - check blow by volume;* 8T-2700 Indicator Group - measures volume of blowby gas coming from crankcase breather and air velocity through radiator;