CONTROL GP-TRANSMISSION 2010211 - Caterpillar

the Product Status Report from the engine ECM before performing any troubleshooting or clearing diagnostic trouble codes. Troubleshoot any active codes before continuing with this procedure.
Table 1
Troubleshooting Test Steps    Values    Results    
1. Check the Battery
A. Verify that the battery is no longer able to hold a charge. Refer to Systems Operation/Testing and Adjusting, "Battery - Test".
   
Battery
   
Result: The battery is OK.
Proceed to Test Step 2.
Result: The battery is not OK.
Repair: Replace the battery. Refer to Disassembly and Assembly for the correct procedure.
   
2. Check the Switched Battery Circuit
A. Verify that a switched battery circuit drained the battery by being left in the ON position.
   
Switched Battery Circuit
   
Result: The switched battery circuit drained the battery by being left in the ON position.
Repair: Charge the battery. Verify that the battery is able to maintain a charge. Refer to Systems Operation/Testing and Adjusting for the correct procedure.
   If the procedure did not correct the issue, Contact your Cat dealer Technical Communicator (TC). For further assistance, your TC can confer with the Dealer Solutions Network (DSN).