CONTROL GP-P 2059360 - Caterpillar

Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00573018
Lubricate O-ring seals (10) and (11) on tube assemblies (9) and (7) with clean engine oil or glycerin.
Illustration 2 g00573017
Install engine oil pump (8) on the cylinder block. Install tube assemblies (7) and (9).
Illustration 3 g00573013
Lubricate O-ring seal (5) on tube assembly (2) with clean engine oil or glycerin.
Illustration 4 g00572987
Put bell assembly (2) in position in the engine oil pump. Install bolt (1).
Put support (4) in position on the tube assemblies and install three bolts (3). End By:
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".