CONTROL GP-TRANSMISSION 2061643 - Caterpillar

Illustration 10 g02224675
Install relief valves (20). Tighten relief valves (20) to the following torque 35 3 N m (26 2 lb ft).
Illustration 11 g02224673
Install O-ring seal (19) .
Illustration 12 g02224657
Install sensor housing (18).
Illustration 13 g02224635
Install O-ring seal (17) .
Illustration 14 g02224579
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install probe assembly (16) on stem valve (11). Tighten probe assembly (16) to the following torque 12 3 N m (106 27 lb in). Install retainer (15) and spring (14) on stem valve (11). Install retainer (13) and flange bolt (12) on stem valve (11). Tighten flange bolt (12) to the following torque 30 7 N m (22 5 lb ft).
Illustration 15 g02224414
Install stem valve (11) .
Illustration 16 g02224393
Install O-ring seal (10) on sensor assembly (9) .
Illustration 17 g02224354
Install sensor assembly (9) and bolts (8). Tighten bolts (8) to the following torque 7 2 N m (62 18 lb in).
Illustration 18 g02224294
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install spring housing (7) and bolts (6) .
Illustration 19 g02224274
Install O-ring seals (5) in manifold (2) .
Illustration 20 g02224254
Install O-ring seal (4) in elbow (3) .
Illustration 21 g02224196
Install elbow (3) and manifold (2). Install fittings (1) .Note: Depending on the application, installation of manifold (2) may not be necessary until after the steering valve has been installed in the machine.End By: Install the steering valve.