CONTROL GP-ENGINE ELECTRONIC 2062710 - Caterpillar

Illustration 1 g03330203
Typical example
Table 1
Specification for 198-6368 Oil Pan Gp and 197-6354 Oil Pan Gp    
Item     Qty     Part     Specification Description    
The sealing surfaces of the oil pan shall be free of oil, debris, gasket material that is protruding, or any other sealant. The oil pan must be assembled and tightened to the cylinder block within 10 minutes of applying sealant.    
-     -     -     Apply, Loctite RTV silicone to a bead of 5 mm (0.2 inch) at two places:
To the connecting joint of the front housing (3) . and to the connecting joint of the flywheel housing (4) .    
-     -     -     Use the following tightening procedure for oil pan bolts:
Tighten the four bolts (1) .
Start with bolt (2) and tighten rest all bolts in a counterclockwise sequence.
Again, start with bolt (2) and tighten all the bolts in a counterclockwise sequence to
31 3 N m (274 27 lb in).