CONTROL GP-ELECTROHYDRAULIC 2076980 - Caterpillar

Removal Procedure
Start By:
Remove heat exchanger.
Illustration 1 g03797983
Disconnect tube assembly (1) .
Illustration 2 g03797972
Remove bolts (2) and water line (3) .
Illustration 3 g03797987
Remove bolts (4) and engine oil cooler (5) .
Illustration 4 g03798188
Remove bolts (6) .
Illustration 5 g03798211
Remove oil cooler (7) and the O-ring seals.
Illustration 6 g03798216
Remove O-ring seals (8) .Installation Procedure
Install engine oil cooler (5) in the reverse order of removal.
Tighten bolts (6) to a torque of 63 7 N m (46 5 lb ft).
Illustration 7 g03798270
Tighten bolts (4) in numerical sequence shown in illustration 7. Tighten bolts (4) to a torque of 40 4 N m (30 3 lb ft).
Tighten bolts (2) to a torque of 25 3 N m (221 27 lb in).