CONTROL GP-JOYSTICK 2086060 - Caterpillar

Saving "Display Settings" or "Machine Settings"
Note: The contents of the "Setup Menu" are configurable at the job site. The number of items that are in the "Setup Menu" may vary depending on the "Operator Configuration" settings of your system and the machine settings. Refer to your supervisor if a specific option is not available.Use the "Save Settings" dialog to save "Display Settings" and the "Machine Settings" to a data card. From this dialog, you can save all the settings in the "Setup Menu - Configuration" dialog.The text items that are shown on the guidance screens can be customized and then saved by saving the "Display Settings".Complete the following steps in order to access the "Save Settings" dialog :
Make sure that a data card is inserted in the display.
Illustration 1 g01300302
From the "Setup Menu - Configuration" dialog, press the arrow keys until "Save Settings" is highlighted. Press the "OK" key in order to continue.
Illustration 2 g01300304
The "Save Settings" dialog appears. Press the arrow keys in order to select either "Display Settings" or "Machine Settings".
Illustration 3 g01300303
Press the "OK" key. The dialog that is shown in Illustration 3 appears.The default name for the "Display Settings" file is "DISPLAY NN". The default name for the "Machine Settings" file is "MOTOR SCRAPER NN"."NN" is a two digit number starting at 01 and incrementing with each new settings file that is saved.The number assigned to a new "Display Settings" file is one more than any similarly named settings file already on the data card. For example, if there is already a scraper "Machine Settings" file (called MOTOR SCRAPER 01) on the card, the AccuGrade System assigns the name MOTOR SCRAPER 02.You can also save the settings to a file name that is more descriptive. For example, you can use a name such as "HIRED SCRAPER". Use the arrow keys to edit the default name.Note: You cannot use the display to write over or delete an existing settings file.
In order to save the settings to the data card, press the "OK" key. After saving, the "Save Settings" dialog appears. Press the escape key in order to go back to the "Setup" Menu.In order to close the dialog without saving the configuration to the data card, press the escape key. The "Save Settings" dialog appears.Note: If you change the default name, and then press the escape key, you are prompted to confirm that you want to cancel your changes.