CONTROL GP 20R2311 - Caterpillar

2. Disconnect wires (1) and cables (2) from the electric starting motor.3. Fasten a hoist to electric starting motor (3). Remove the three bolts that hold the starting motor to the flywheel housing. Remove the starting motor. The weight of the starting motor is 32 kg (70 lb.).Install Electric Starting Motor
1. Fasten a hoist to electric starting motor (3) and put it in position in the flywheel housing. Install the three bolts that hold it.2. Connect the wires and cables to the starting motor. Tighten the nuts that hold the wires to a torque of 25 to 35 N m (20 to 25 lb. ft.).end by:a) install hood, muffler and precleaner assembly