CONTROL GP-IMPLEMENT 2115568 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
Check all of the O-ring seals and the components for wear or damage. Replace the components, if necessary.
Lubricate all of the O-ring seals lightly with the lubricant that is being sealed.
Illustration 1 g00878684
Attach Tooling (A) and a suitable lifting device to steering hydraulic tank (1). The weight of steering hydraulic tank (1) is approximately 49 kg (108 lb).
Illustration 2 g00878762
Position steering hydraulic tank (1) to the machine. Install bolts (18).
Illustration 3 g00878627
Install bolts (17).
Illustration 4 g00878608
Install hose clips (15) and (16).
Illustration 5 g00878411
Install clips (13) and (14).
Illustration 6 g00878265
Illustration 7 g00878352
Connect tube assembly (10) to the steering hydraulic tank.
Connect hose assembly (9) to the steering hydraulic tank.
Install the clip on the tube (12).
Attach clip (8) to the tube assembly. Connect tube assembly (7) to the steering hydraulic tank.
Connect hose assembly (6) to the steering hydraulic tank.
Install bracket assembly (5) to the steering hydraulic tank.
Refill the hydraulic tank (steering). Refer to Operation and Maintenance Manual, "Steering System Oil - Change". End By:
Remove the body retaining pin. Refer to Disassembly and Assembly, "Retaining Ring and Pin (Body) - Remove and Install".