2301025 CONTROL GP-STEERING & XMSN Caterpillar parts
D3G, D4G, D5G
Rating:
Alternative (cross code) number:
CA2301025
230-1025
2301025
CA2301025
230-1025
2301025
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$24.98
26 Jun 2023
CN: GACTIVITY
GACTIVITY Nautical Anchor Car Trash Can with Lid Collapsible Reusable Waterproof Car Garage Bag,Automotive Garbage Can,Car Accessories Interior Car Organizer
GACTIVITY Durable Material: Car Trash Can made of twill weave material,the inner material is a waterproof and easy-to-clean lining. You can put it directly in the garbage, or put a disposable bag inside, and use two side clips to fix the handle of the bag, just keep everything clean. || Collapsible Shape & Adjustable Strap: You can place our car trashcan on the floor, car seat or hang it for the seat back with the drawstring cord. With adjustable strap, this auto trash container can be placed anywhere. || Perfect size:Car trash can size: 9.5x 6.3x 6.7 inches, sufficient space, enough for car trash. This car trash can can be folded up when not in use for better storage. || Multipurpose: This car garbage bin can be used as storage bag to keep items such as cups, toys, drinks and important documents. Additionally,Keep the car tidy, it will be your little helper for storage. Buy a gift for your car or a friend for a new car. || Easy to Install and Collapse:The car garbage bag can hang on the front or back of the seat, center console, glove box or even the gear lever, and adjust the strap to the appropriate length. Therefore, you needn't worry about it shaking when the vehicle is driving. In addition, when you don’t need to use it, you can also fold it up.
GACTIVITY Durable Material: Car Trash Can made of twill weave material,the inner material is a waterproof and easy-to-clean lining. You can put it directly in the garbage, or put a disposable bag inside, and use two side clips to fix the handle of the bag, just keep everything clean. || Collapsible Shape & Adjustable Strap: You can place our car trashcan on the floor, car seat or hang it for the seat back with the drawstring cord. With adjustable strap, this auto trash container can be placed anywhere. || Perfect size:Car trash can size: 9.5x 6.3x 6.7 inches, sufficient space, enough for car trash. This car trash can can be folded up when not in use for better storage. || Multipurpose: This car garbage bin can be used as storage bag to keep items such as cups, toys, drinks and important documents. Additionally,Keep the car tidy, it will be your little helper for storage. Buy a gift for your car or a friend for a new car. || Easy to Install and Collapse:The car garbage bag can hang on the front or back of the seat, center console, glove box or even the gear lever, and adjust the strap to the appropriate length. Therefore, you needn't worry about it shaking when the vehicle is driving. In addition, when you don’t need to use it, you can also fold it up.
$293.12
26 Apr 2021
0.87[0.39] Pounds
US: Turtle & Hughes
ISCAR Tool Block For Conventional &CNC Machines - MODEL : SGTBU 16-5G Shank Width : 0.63" Accepts 'Blade Height : 1.02" Overall Length : 3.00"
ISCAR Used to mount cut-off blades on lathes. || For right or left hand turning. || For use with CNC machines. || Updated version of SGIH. || Easy removal of inserts with extractor.
ISCAR Used to mount cut-off blades on lathes. || For right or left hand turning. || For use with CNC machines. || Updated version of SGIH. || Easy removal of inserts with extractor.
Number on catalog scheme:
19
For full view, you need register
Information:
Inspect
Inspection of the Cat Pin Grabber coupler is required after a failure of the primary engaging system or a miscoupling of the tool, causing the work tool to swing by the secondary lock. Contact your Cat dealer.
Note: Clean the quick coupler prior to inspection in order to inspect the quick coupler properly.Perform an inspection of the quick coupler daily.Perform any additional inspections when required.Refer to Operation and Maintenance Manual, "Daily Inspection" for additional information.Required Templates and Compatibility Table
Table 1
Required Templates
Machine Linkage Template Part Number Part Number of Coupler with Eye Part Number of Coupler for Japanese Market Sales Model Usage Coupler Serial Number Parts Manual
473-7694 388-6156 486-5362 312D, 313D, 314D (S/N: HB2; PGX) SEBP6518
473-8143 391-4347 486-5364 315D, 315E (S/N: HB4; PG2)
B 473-9112 388-0067 486-5366 320D, 321D, 323D (S/N: HB3; PG3)
CB 473-9177 389-7189 486-5368 324D, 324E, 325D, 328D, 329D, 329E (S/N: HB5; PG4)
CB 473-9177 389-7189 486-5368 329E (S/N: HB5; PG4)
DB 473-9664 388-9724 486-5372 330D, 336D, 336E (S/N: CL4; HB8)
DB 473-9664 389-8070 486-5374 330D, 336D, 336E (S/N: HB7; PG5)
481-3802 315D, M313D, M314F (S/N: HBW; PWH)
TB 473-9702 390-1017 486-5736 345D, 349E (S/N: HB9; NC3; PG6)
TB 473-9702 390-0904 486-5734 345D, 349E (S/N: CL6; HBM; NC4)
CB 473-9177 389-7526 486-5370 324D, 324E, 325D, 328D, 329D, 329E (S/N: CL5; HB6) Procedure to Measure the Frame of the Coupler for Wear
Illustration 1 g03880183
Typical example of a pin grabber coupler and template
(1) Template
Verify that the template being used is compatible with the model of quick coupler.
Place the template against the frame of the coupler and align the hole on the template with the hole on the frame.
Illustration 2 g03880701
Typical example of a pin grabber coupler and template
(A) Area of wear
(1) Template
Measure the area around the template for wear.
If the wear is more than 4 mm (0.18inch), proceed to "Procedure to Repair the Frame of the Coupler".Procedure to Repair the Frame of the Coupler
The area that is worn will need to be built up by welding. Refer to Special Instruction, REHS1841, "General Welding Procedures"
Once the frame has been fully welded, allow the repaired area to cool slowly.
Grind off the welded surface in order to match the template.General Inspection and Repair Procedure for Coupler
Refer to Specifications, Systems Operation, Testing and Adjusting, Disassembly and Assembly, UENR3525, "Quick Coupler Work Tool" for additional information for the coupler.
Inspect the rest of the coupler for wear, cracks, broken components, and loose hardware.
If any cracks are found, gouge out and reweld as per Special Instruction, REHS1841, "General Welding Procedures".
Replace any broken or damaged components.
Inspect hardware for proper torque and replace if necessary.
Inspection of the Cat Pin Grabber coupler is required after a failure of the primary engaging system or a miscoupling of the tool, causing the work tool to swing by the secondary lock. Contact your Cat dealer.
Note: Clean the quick coupler prior to inspection in order to inspect the quick coupler properly.Perform an inspection of the quick coupler daily.Perform any additional inspections when required.Refer to Operation and Maintenance Manual, "Daily Inspection" for additional information.Required Templates and Compatibility Table
Table 1
Required Templates
Machine Linkage Template Part Number Part Number of Coupler with Eye Part Number of Coupler for Japanese Market Sales Model Usage Coupler Serial Number Parts Manual
473-7694 388-6156 486-5362 312D, 313D, 314D (S/N: HB2; PGX) SEBP6518
473-8143 391-4347 486-5364 315D, 315E (S/N: HB4; PG2)
B 473-9112 388-0067 486-5366 320D, 321D, 323D (S/N: HB3; PG3)
CB 473-9177 389-7189 486-5368 324D, 324E, 325D, 328D, 329D, 329E (S/N: HB5; PG4)
CB 473-9177 389-7189 486-5368 329E (S/N: HB5; PG4)
DB 473-9664 388-9724 486-5372 330D, 336D, 336E (S/N: CL4; HB8)
DB 473-9664 389-8070 486-5374 330D, 336D, 336E (S/N: HB7; PG5)
481-3802 315D, M313D, M314F (S/N: HBW; PWH)
TB 473-9702 390-1017 486-5736 345D, 349E (S/N: HB9; NC3; PG6)
TB 473-9702 390-0904 486-5734 345D, 349E (S/N: CL6; HBM; NC4)
CB 473-9177 389-7526 486-5370 324D, 324E, 325D, 328D, 329D, 329E (S/N: CL5; HB6) Procedure to Measure the Frame of the Coupler for Wear
Illustration 1 g03880183
Typical example of a pin grabber coupler and template
(1) Template
Verify that the template being used is compatible with the model of quick coupler.
Place the template against the frame of the coupler and align the hole on the template with the hole on the frame.
Illustration 2 g03880701
Typical example of a pin grabber coupler and template
(A) Area of wear
(1) Template
Measure the area around the template for wear.
If the wear is more than 4 mm (0.18inch), proceed to "Procedure to Repair the Frame of the Coupler".Procedure to Repair the Frame of the Coupler
The area that is worn will need to be built up by welding. Refer to Special Instruction, REHS1841, "General Welding Procedures"
Once the frame has been fully welded, allow the repaired area to cool slowly.
Grind off the welded surface in order to match the template.General Inspection and Repair Procedure for Coupler
Refer to Specifications, Systems Operation, Testing and Adjusting, Disassembly and Assembly, UENR3525, "Quick Coupler Work Tool" for additional information for the coupler.
Inspect the rest of the coupler for wear, cracks, broken components, and loose hardware.
If any cracks are found, gouge out and reweld as per Special Instruction, REHS1841, "General Welding Procedures".
Replace any broken or damaged components.
Inspect hardware for proper torque and replace if necessary.
Caterpillar SIS machinery equipment:
Caterpillar SIS
D3G XL & D3G LGP Track-Type Tractors BYR00001-UP (MACHINE) POWERED BY 3046 Engine »
230-1025
CONTROL GP-STEERING & XMSN
D3G XL & D3G LGP Track-Type Tractors BYR00001-UP (MACHINE) POWERED BY 3046 Engine »
230-1025
CONTROL GP-STEERING & XMSN
D4G XL & D4G LGP Track-Type Tractors HYD00001-UP (MACHINE) POWERED BY 3046 Engine »
230-1025
CONTROL GP-STEERING & XMSN
D4G XL & D4G LGP Track-Type Tractors HYD00001-UP (MACHINE) POWERED BY 3046 Engine »
230-1025
CONTROL GP-STEERING & XMSN
D5G XL & D5G LGP Track-Type Tractors RKG00001-UP (MACHINE) POWERED BY 3046 Engine »
230-1025
CONTROL GP-STEERING & XMSN
D5G XL & D5G LGP Track-Type Tractors RKG00001-UP (MACHINE) POWERED BY 3046 Engine »
230-1025
CONTROL GP-STEERING & XMSN
Caterpillar parts catalog:
Parts control Caterpillar catalog:
1796480
CONTROL GP-AIR & TEMPERATURE
D3G, D4G, D5G
D3G, D4G, D5G
1745863
CONTROL GP-GOVERNOR & BRAKE
D3G, D4G, D5G
D3G, D4G, D5G
312C, 315C, 924G, 924GZ, 938G II, 950G II, 953C, 962G II, 963C, 966G II, 973C, 980G II, D3G, D4G, D5G, D5N, D6N, D6R II, IT28G, IT38G II, IT62G II
1775284
CONTROL GP-AIR & TEMPERATURE
D3G, D4G, D5G
D3G, D4G, D5G
1788032
CONTROL GP-HYDRAULIC HAND
D3G, D4G, D5G
D3G, D4G, D5G
1833282
CONTROL GP-JOYSTICK
D3G, D4G, D5G
D3G, D4G, D5G
1745968
CONTROL GP-STEERING & TMSN
D3G, D4G, D5G
D3G, D4G, D5G
2201135
CONTROL GP-STEERING & XMSN
D3G, D4G, D5G
D3G, D4G, D5G
2307338
CONTROL GP-STEERING & XMSN
D3G, D4G, D5G
D3G, D4G, D5G
1745990
CONTROL GP-HYDRAULIC HAND
D3G, D4G, D5G
D3G, D4G, D5G
924G, 924GZ, D3G, D4G, D5G
1789090
CONTROL GP-UNPROGRAMMED
D3G, D4G, D5G, TA19-M2WD
D3G, D4G, D5G, TA19-M2WD
1245751
CONTROL GP-PILOT OPERATED HYD
815F, 816F
815F, 816F
8D8020
CONTROL GP-HITCH
621B, 627B
621B, 627B
2782477
CONTROL & MTG GP-ENGINE ELEK
587T, D8R, PL87
587T, D8R, PL87
2887329
CONTROL GP-DRIVE AXLE
C9, TH31-E61, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I, TH35-C15T, TH35-E81
C9, TH31-E61, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I, TH35-C15T, TH35-E81
1527903
CONTROL GP-HYDRAULIC LOCKOUT
120H, 120H ES, 120K, 120K 2, 12H, 12H ES, 12K, 135H, 140H, 140H ES, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160K, 163H, 163H NA, 16H
120H, 120H ES, 120K, 120K 2, 12H, 12H ES, 12K, 135H, 140H, 140H ES, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160K, 163H, 163H NA, 16H
1693330
CONTROL AR-DASA ELECTRONIC
HH45, HH55, HH65, HH75
HH45, HH55, HH65, HH75
1561590
CONTROL GP-FOOT BRAKE
924F, IT24F
924F, IT24F
3W5047
CONTROL GP-HYDRAULIC
65, 75
65, 75
1641440
CONTROL GP-HYDRAULIC HAND
416D, 424D, 428D, 438D
416D, 424D, 428D, 438D
4N7661
CONTROL GP-GOVERNOR
594H, D9H
594H, D9H
1720928
CONTROL GP-DIFFERENTIAL LOCK
621G, 623G, 627G
621G, 623G, 627G