CONTROL GP-HANDLE 2306446 - Caterpillar

VALIGN="middle" ALIGN="center"> X
42 Check The Calibration of the Timing Sensor. X X
46 Low Oil Pressure Warning X X X X
51 Intermittent Battery Power to the ECM X X X X
52 Programmed Parameter Fault X X X X
53 ECM Fault X X X X
56 The Following Parameters Must Be Checked: Customer and System X X X
58 Low Coolant Level Warning X X
59 Incorrect Engine Software X X X X
61 High Coolant Temperature Warning X X X
62 Coolant Level Sensor Fault X
63 Low Fuel Pressure Warning X X X
64 "(High) Inlet Air Temperature Warning" X X X
65 High Fuel Temperature Warning X X X
66 High Transmission Oil Temperature Warning X
67 Transmission Oil Temperature Sensor Fault X
68 Transmission Oil Pressure Sensor Fault X
69 High Transmission Oil Pressure Warning X
71 "Injector Cylinder #1 Fault" X X X X
72 "Injector Cylinder #2 Fault" X X X X
73 "Injector Cylinder #3 Fault" X X X X
74 "Injector Cylinder #4 Fault" X X X X
75 "Injector Cylinder #5 Fault" X X X X
76 "Injector Cylinder #6 Fault" X X X X
(1) Operate the engine cautiously. Get immediate service. Severe engine damage may result.
(2) The operator should go to the nearest location for service.
(3) The operator should investigate the problem at a convenient time.
(4) The Diagnostic Flash Codes reduce the effectiveness of the Engine Monitoring feature.
(5) These Diagnostic Flash Codes may affect the system only under specific environmental conditions such as engine start-up at cold temperatures, etc.