2308215 CONTROL GP-ADDITIVE Caterpillar parts
RM-300, RM-500
Rating:
Alternative (cross code) number:
CA2308215
230-8215
2308215
CA2308215
230-8215
2308215
Weight: 0.100 pounds 0 kg.
RECLAIMER MIXER,
This part in 5 request:
Show.
This information for suppliers only!
2023-09-03
2023-06-14
2023-06-03
2021-11-17
2021-06-24
Number on catalog scheme:
1
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-3263 Thread Lock Compound 1
Illustration 1 g00576686
Apply Tooling (A) to bolts (4) .
Position track roller (5) to the undercarriage frame.
Install washers and bolts (4) to the track roller. Tighten the bolts.
Repeat Steps 1 through 3 for the other four track rollers.
Illustration 2 g00576537
Make sure that grease fitting (3) is properly tightened before attempting to adjust the track. Tighten the grease fitting to a torque of 34 N m (25 lb ft). Refer to Operation and Maintenance Manual, "Track Adjustment - Inspect/Adjust" when you are attempting to adjust the track.
Illustration 3 g00576535
Place panel (2) to the undercarriage frame.
Install washers and two bolts (1). Tighten the bolts.
Illustration 4 g00586999
Raise the machine with the boom and remove the blocks.
Lower the machine to the ground with the boom.
Repeat Steps 1 through 9 for the other side of the five track rollers.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-3263 Thread Lock Compound 1
Illustration 1 g00576686
Apply Tooling (A) to bolts (4) .
Position track roller (5) to the undercarriage frame.
Install washers and bolts (4) to the track roller. Tighten the bolts.
Repeat Steps 1 through 3 for the other four track rollers.
Illustration 2 g00576537
Make sure that grease fitting (3) is properly tightened before attempting to adjust the track. Tighten the grease fitting to a torque of 34 N m (25 lb ft). Refer to Operation and Maintenance Manual, "Track Adjustment - Inspect/Adjust" when you are attempting to adjust the track.
Illustration 3 g00576535
Place panel (2) to the undercarriage frame.
Install washers and two bolts (1). Tighten the bolts.
Illustration 4 g00586999
Raise the machine with the boom and remove the blocks.
Lower the machine to the ground with the boom.
Repeat Steps 1 through 9 for the other side of the five track rollers.
Caterpillar parts catalog:
Parts control Caterpillar catalog:
120K, 120K 2, 12K, 12M, 140G, 140K, 140K 2, 140M, 140M 2, 14M, 160K, 160M, 160M 2, 16M, 2290, 2390, 2391, 2491, 2590, 345D L, 511, 521, 521B, 522, 522B, 525C, 532, 535C, 541, 541 2, 545C, 551, 552, 55...
2643232
CONTROL GP-WATER
RM-300, RM-500
RM-300, RM-500
2721975
CONTROL GP-ADDITIVE
RM-300, RM-500
RM-300, RM-500
2307012
CONTROL GP-STEERING
RM-300, RM-500
RM-300, RM-500
120K, 120K 2, 120M, 120M 2, 12K, 12M, 12M 2, 140K, 140K 2, 140M, 140M 2, 14M, 160K, 160M, 160M 2, 16M, 2384C, 2470C, 2484C, 24M, 2570C, 2670C, 2864C, 311D LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2...
120K, 12K, 12M, 140G, 140K, 140M, 140M 2, 14M, 160K, 160M, 160M 2, 16M, 2290, 2390, 2391, 2491, 24M, 2590, 345D L, 511, 521, 521B, 522, 522B, 525C, 532, 535C, 541, 541 2, 545C, 551, 552, 552 2, 583T, ...
2497139
CONTROL GP-ELECTRONIC
RM-300, RM-500
RM-300, RM-500
2549774
CONTROL GP-ACCELERATION
CB-334E
CB-334E
2494807
CONTROL GP-ACCELERATION
CB-214E, CB-334E
CB-214E, CB-334E
2544191
CONTROL GP-ACCELERATION
CB-214E, CB-334E
CB-214E, CB-334E
3648315
CONTROL GP-DISPLAY ELECTRONIC
CP-44, CP-56, CP-573E, CP-64, CP-663E, CP-76, CS-44, CS-54, CS-54B, CS-56, CS-563E, CS-583E, CS-64, CS-663E, CS-683E, CS-74
CP-44, CP-56, CP-573E, CP-64, CP-663E, CP-76, CS-44, CS-54, CS-54B, CS-56, CS-563E, CS-583E, CS-64, CS-663E, CS-683E, CS-74
2122282
CONTROL GP-MONITOR
PM-201, PM-565B
PM-201, PM-565B
2598740
CONTROL GP-ACCELERATION
CB-334E
CB-334E
2828241
CONTROL GP-UNPROGRAMMED
AP-1055D, AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG-2455D, BG-260D, BG1000E, BG1055E, BG500E, BG600D, BG655D
AP-1055D, AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG-2455D, BG-260D, BG1000E, BG1055E, BG500E, BG600D, BG655D
2497139
CONTROL GP-ELECTRONIC
RM-300, RM-500
RM-300, RM-500