CONTROL GP-HANDLE 2335236 - Caterpillar

Maximum Velocity Configuration
The maximum velocity configuration value sets the following settings:
The maximum change in lift linkage velocity allowed before the lift too jerky reweigh is triggered.The default setting is 1.5 percent/sec.Note: Unless standard procedures for machine operation require changing the Maximum velocity configuration value, the value should be left unchanged.Perform the following to enter the "Maximum Velocity configuration" submenu:
From the Configuration > Payload menu, press the up or down buttons until "Max Velocity Cnf" is highlighted.
Press the "OK" button.
The maximum velocity configuration screen is an increment/decrement data entry screen. After the desired value is entered, press the "OK" button to accept the change.