CONTROL GP-DISPLAY ELECTRONIC 2492775 - Caterpillar

Table 1
An EC Declaration of Conformity document was provided with the machine if it was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC Declaration of Conformity provided with the machine. The extract shown below from an EC Declaration of Conformity for machines that are declared compliant to "2006/42/EC" applies only to those machines originally "CE" marked by the manufacturer listed and which have not since been modified.    
   
EC DECLARATION OF CONFORMITY OF MACHINERY
   
   
Manufacturer: Caterpillar Inc., 100 N.E. Adams Street, Peoria, Illinois 61629, USA
   
Person authorized to compile the Technical File and to communicate relevant part (s) of the Technical File to the Authorities of European Union Member States on request:
   
    Standards & Regulations Manager, Caterpillar France S.A.S 40,
Avenue Leon-Blum, B.P. 55, 38041 Grenoble Cedex 9, France    
I, the undersigned, _________, hereby certify that the construction equipment specified hereunder    
Description:
    Generic Denomination:     Earth-moving Equipment        
    Function:     Wheeled Loader            
    Model/Type:     246C, 256C, 262C, 272C Skid Steer Loader            
    Serial Number:                
    Commercial Name:     Caterpillar
           
Fulfils all the relevant provisions of the following Directives        
                           
    Directives     Notified Body    
Document No.        
    2006/42/EC     N/A            
    2000/14/EC amended by 2005/88/EC, Note (1)     A V Technology Ltd.            
    2004/108/EC     N/A            
                           
Note (1)
    Annex VI____ Guaranteed Sound Power Level -____dB (A)
Representative Equipment Type Sound Power Level - ____dB (A)
Engine Power per ____-____ kW Rated engine speed - ____ rpm
Technical Documentation accessible through person listed above authorized to compile the Technical File
       
                       
           
Done at:
            Signature            
Date:
            Name/Position            
                           
Note: The above information was correct as of September 2009, but may be subject to change, please refer to the individual declaration of conformity issued with the machine for exact details.