CONTROL GP-HANDLE 2667631 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Personal injury or death may result from failure to adhere to the following procedures.Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire.Clean up all leaked or spilled fuel. Do not smoke while working on the fuel system.Turn the disconnect switch OFF or disconnect the battery when changing fuel filters.
Illustration 1 g06095521
Disconnect hose assembly (1) and position out of the way.
Illustration 2 g06095533
Disconnect harness assembly (2) and hose assembly (4) and position out of the way.
Remove elbow assembly (3) and elbow assembly (5).
Illustration 3 g06095545
Remove bolts (6) and bracket (7).
Illustration 4 g06095734
Remove bolts (9), bolts (10) (not shown), bracket (8) fuel transfer pump (11), and the O-ring seal.
Illustration 5 g06095744
Remove fuel transfer pump relief valve (12) and connector (13).