CONTROL GP-HANDLE 2773282 - Caterpillar

- Lubricate
Bucket Pivot Bearings - Lubricate
Cab Air Filter - Clean/Replace
Cooling System Coolant Level - Check
Engine Air Filter Service Indicator - Inspect
Engine Compartment - Inspect/Clean
Engine Oil Level - Check
Fuel System Primary Filter (Water Separator) - Drain
Hydraulic System Oil Level - Check
Quick Coupler - Lubricate
Seat Belt - Inspect
Steering Cylinder Bearings - Lubricate
Tire Inflation - Check
Wheel Nut Torque - Check
Every 10 Service Hours
Transmission Oil Level - Check
Every 50 Service Hours
Axle Breathers - Clean/Replace
Every 250 Service Hours
Battery - Clean
Belts - Inspect/Adjust/Replace
Braking System - Test
Differential and Final Drive Oil Level - Check
Engine Oil Sample - Obtain
Hydrostatic Drive Oil Level - Check
Steering Column Play - Check
Initial 500 Service Hours
Differential and Final Drive Oil - Change
Differential and Final Drive Oil - Change
Hydrostatic Transmission Gear Box Oil - Change
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Cab Air Filter - Replace
Cooling System Coolant Sample (Level 1) - Obtain
Differential and Final Drive Oil Sample - Obtain
Differential and Final Drive Oil Sample - Obtain
Engine Air Filter Primary Element - Replace
Engine Air Filter Secondary Element - Replace
Engine Air Precleaner - Clean
Engine Oil and Filter - Change
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel System Secondary Filter - Replace
Hydraulic System Oil - Change
Hydraulic System Oil Sample - Obtain
Hydrostatic Drive Oil Sample - Obtain
Every 1000 Service Hours
Battery Hold-Down - Tighten
Differential and Final Drive Oil - Change
Differential and Final Drive Oil - Change
Hydrostatic Transmission Gear Box Oil - Change
Rollover Protective Structure (ROPS) - Inspect
Every 1500 Service Hours
Diesel Exhaust Fluid Filter - Replace
Engine Crankcase Breather Element - Replace
Every 2000 Service Hours
Hydraulic System Oil Filter - Replace
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Hoses and Clamps - Inspect/Replace
Every 3000 Service Hours
Belts - Replace
Cooling System Water Temperature Regulator - Replace
Differential and Final Drive Oil - Change
Steering Column Spline (HMU Steering) - Lubricate
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 6000 Service Hours
Cooling System Coolant (ELC) - Change