CONTROL & MTG GP-MACHINE 2969312 - Caterpillar

Disconnect Switch - Replace
Condenser (Refrigerant) - Clean
Cutting Edges and End Bits - Inspect/Replace
Engine Air Filter Primary Element - Clean/Replace
Engine Air Filter Secondary Element - Replace
Engine Air Precleaner - Clean
Ether Starting Aid Cylinder - Replace
Fuel System - Prime
Fuses and Circuit Breakers - Replace/Reset
Oil Filter - Inspect
Radiator Core - Clean
Radiator Pressure Cap - Clean/Replace
Ripper Tip and Shank Protector - Inspect/Replace
Window Washer Reservoir - Fill
Window Wipers - Inspect/Replace
Windows - Clean
Every 10 Service Hours or Daily
Backup Alarm - Test
Brakes, Indicators and Gauges - Test
Cooling System Coolant Level - Check
Engine Oil Level - Check
Fuel System Primary Filter (Water Separator) - Drain
Fuel Tank Water and Sediment - Drain
Horn - Test
Hydraulic System Oil Level - Check
Seat Belt - Inspect
Transmission Oil Level - Check
Every 50 Service Hours or Weekly
Bulldozer Cylinder Support Bearings - Lubricate
Ripper Linkage and Cylinder Bearings - Lubricate
Track Pins - Inspect
Track Roller Frame Bearings - Lubricate
Every 100 Service Hours or 2 Weeks
Hydraulic Control Linkage - Lubricate
Every 250 Service Hours or Monthly
Belts - Inspect/Adjust/Replace
Bulldozer Tilt Brace - Lubricate
Fan Drive Bearing - Lubricate
Final Drive Oil Level - Check
Track - Check/Adjust
Every 250 Service Hours or 3 Months
Engine Oil and Filter - Change
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Cooling System Coolant Sample (Level 1) - Obtain
Final Drive Oil Sample - Obtain
Every 500 Service Hours or 3 Months
Engine Crankcase Breather - Clean
Equalizer Bar Pads - Inspect/Replace
Fuel System Primary Filter - Clean/Replace
Fuel System Secondary Filter - Replace
Fuel Tank Cap and Strainer - Clean
Hydraulic System Oil Filter - Replace
Hydraulic System Oil Sample - Obtain
Transmission Oil Filter - Replace
Transmission Oil Sample - Obtain
Every 1000 Service Hours
Battery - Inspect
Every 1000 Service Hours or 6 Months
Transmission Magnetic Screen - Clean
Transmission Oil - Change
Every 2000 Service Hours or 1 Year
Engine Valve Lash - Check
Engine Valve Rotators - Inspect
Final Drive Oil - Change
Hydraulic System Oil - Change
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change