CONTROL GP-HANDLE 2974595 - Caterpillar

Settings Menu
Illustration 1 g03590116
The Settings menu allows the user to adjust the parameters for the following setting:
Display settings
Machine SettingNote: Cat ET may be used to access parameters and CAT ET can be used to change parameters. However, these actions are more easily performed by using the Monitoring System Display.
Illustration 2 g03575776
The "Settings" menu option is entered by selecting "Settings" from the main menu. Press the "Four Way" button (1) until "Settings" is highlighted. Then press the "OK" button (2 ). Refer to Illustration 2.Note: Press the main menu button (3) in order to display the "Main Menu".
Illustration 3 g03575777
The following screen will now be displayed.
Illustration 4 g03575796
The "Settings" menu organizes the variable parameters into categories. These categories have adjustable parameters. The categories are "Display" and "Machine". The menu options are displayed on the right half of the screen, and the user settings are displayed on the selected screens.To adjust the associated parameters, press the "Four Way" button (1) until the desired category is highlighted. Then press the "OK" button (2) in order to access the parameters in that category. From this point, follow the screen prompts adjust the associated parameters to the available parameters.Display Settings
From the "Display Setup" menu, use "Four Way" button (1) to highlight the desired parameter. Then press the "OK" button (2) , allowing access to that parameters screen. Then follow the screen prompts in order to adjust the parameter. All the parameters in this category relate to the operators preferences in regard to the monitoring system display. The following parameters may be adjusted:Language - Select a language.Units - Select one of the following options: Metric and EnglishBacklight Day - Select the amount of brightness for the digital display window without headlights on.Backlight Night - Select the amount of brightness for the digital display window with headlights on.Contrast - Select the desired degree of contrast for the digital display window.Machine Settings
The following parameter may be adjusted:Operator Spd Limit
This is the speed limit that can be set by the operator to limit machine speed min speed = 10 kph (increment 1 kph / 1 mph)max = The default max speed is 55 km/h (34.17 mph)Note: This is a configurable parameter in ET. The maximum speed limit will be limited to the setting that has been configured in ET.
Illustration 5 g03586706
From the "Settings" menu, use "Four Way" button (1) to highlight "Machine" and Press the "OK" button.
Illustration 6 g03590117
From the "Machine Setting" menu press the "OK" Button.
Illustration 7 g03590118
Use "Four Way" button (1) to set the desired Operator Speed Limit and press the "OK" Button to set speed.Note: This parameter is not available if the machine ground speed is greater than 1.5 km/h (0.93 mph).