CONTROL GP-TRANSMISSION HYD 2P5810 - Caterpillar

Illustration 1 g01080622
(A) Outer diameter of a new piston over two lands ... 139.20 0.05 mm (5.480 0.002 inch) (B) Bore in a new head over four lands ... 63.78 0.03 mm (2.511 0.001 inch) (C) Bore in a new cylinder assembly ... 139.75 0.10 mm (5.502 0.004 inch) (D) Outer diameter of a new rod ... 63.45 mm (2.498 inch) (1) Tighten the four bolts when the rod is fully extended. (2) Lubricate the nut and tighten the nut to a torque of 2700 270 N m (2000 200 lb ft). (3) Lubricate the sealing lips with the lubricant that is being sealed. (4) Apply 7M-7456 Bearing Mount Compound to the wiper seal groove prior to assembly. (5) The bearing must not extend beyond either surface.